Copper(I) chloride
Chemical compound
From Wikipedia, the free encyclopedia
Copper(I) chloride, commonly called cuprous chloride, is the lower chloride of copper, with the formula CuCl. The substance is a white solid sparingly soluble in water, but very soluble in concentrated hydrochloric acid. Impure samples appear green due to the presence of copper(II) chloride (CuCl2).
_chloride_pure.jpg)
| |
-chloride-from-xtal-unit-cell-3D-bs-17.png) | |
| Names | |
|---|---|
| IUPAC name
Copper(I) chloride | |
| Other names
Cuprous chloride | |
| Identifiers | |
3D model (JSmol) |
|
| 8127933 | |
| ChEBI | |
| ChemSpider | |
| DrugBank | |
| ECHA InfoCard | 100.028.948 |
| EC Number |
|
| 13676 | |
PubChem CID |
|
| RTECS number |
|
| UNII | |
CompTox Dashboard (EPA) |
|
| |
| |
| Properties | |
| CuCl | |
| Molar mass | 98.999 g/mol[1] |
| Appearance | white powder, slightly green from oxidized impurities |
| Density | 4.14 g/cm3[1] |
| Melting point | 423 °C (793 °F; 696 K)[1] |
| Boiling point | 1,490 °C (2,710 °F; 1,760 K) (decomposes)[1] |
| 0.047 g/L (20 °C)[1] | |
Solubility product (Ksp) |
1.72×10−7 |
| Solubility | insoluble in ethanol, acetone;[1] soluble in concentrated HCl, NH4OH |
| Band gap | 3.25 eV (300 K, direct)[2] |
| −40.0·10−6 cm3/mol[3] | |
Refractive index (nD) |
1.930[4] |
| Structure | |
| Zincblende, cF20 | |
| F43m, No. 216[5] | |
a = 0.54202 nm | |
Lattice volume (V) |
0.1592 nm3 |
Formula units (Z) |
4 |
| Hazards | |
| GHS labelling: | |
  | |
| Warning | |
| H302, H410 | |
| P264, P270, P273, P301+P312, P330, P391, P501 | |
| NFPA 704 (fire diamond) | |
| Flash point | Non-flammable |
| Lethal dose or concentration (LD, LC): | |
LD50 (median dose) |
140 mg/kg |
| NIOSH (US health exposure limits): | |
PEL (Permissible) |
TWA 1 mg/m3 (as Cu)[6] |
REL (Recommended) |
TWA 1 mg/m3 (as Cu)[6] |
IDLH (Immediate danger) |
TWA 100 mg/m3 (as Cu)[6] |
| Safety data sheet (SDS) | JT Baker |
| Related compounds | |
Other anions |
Copper(I) fluoride Copper(I) bromide Copper(I) iodide |
Other cations |
Silver(I) chloride Gold(I) chloride |
Related compounds |
Copper(II) chloride |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
| |
Occurrence
Structure
Copper(I) chloride has the cubic zincblende crystal structure at ambient conditions. Upon heating to 408 °C the structure changes to hexagonal. Several other crystalline forms of CuCl appear at high pressures (several GPa).[5]
Synthesis
Copper(I) chloride is produced industrially by the direct combination of copper metal and chlorine at 450–900 °C:[9][10]
- 2 Cu + Cl2 → 2 CuCl
Copper(I) chloride can also be prepared by reducing copper(II) chloride with sulfur dioxide, or with ascorbic acid (vitamin C) that acts as a reducing sugar:[11][12]
- 2 CuCl2 + SO2 + 2 H2O → 2 CuCl + H2SO4 + 2 HCl
- 2 CuCl2 + C6H8O6 → 2CuCl + 2HCl + C6H6O6
Many other reducing agents can be used.[10]
Uses
The main use of copper(I) chloride is as a precursor to the fungicide copper oxychloride. For this purpose aqueous copper(I) chloride is generated by comproportionation and then air-oxidized:[10]
- Cu + CuCl2 → 2 CuCl
- 4 CuCl + O2 + 2 H2O → Cu3Cl2(OH)4 + CuCl2
Copper(I) chloride catalyzes a variety of organic reactions, as discussed above. Its affinity for carbon monoxide in the presence of aluminium chloride is exploited in the COPureSM process.[13]
In organic synthesis
CuCl is used as a co-catalyst with carbon monoxide, aluminium chloride, and hydrogen chloride in the Gatterman-Koch reaction to form benzaldehydes.[14]
In the Sandmeyer reaction, the treatment of an arenediazonium salt with CuCl leads to an aryl chloride. For example:[15][16]
The reaction has wide scope and usually gives good yields.[16]
Early investigators observed that copper(I) halides catalyse 1,4-addition of Grignard reagents to alpha,beta-unsaturated ketones[17] led to the development of organocuprate reagents that are widely used today in organic synthesis:[18]
This finding led to the development of organocopper chemistry. For example, CuCl reacts with methyllithium (CH3Li) to form "Gilman reagents" such as (CH3)2CuLi, which find use in organic synthesis. Grignard reagents form similar organocopper compounds. Although other copper(I) compounds such as copper(I) iodide are now more often used for these types of reactions, copper(I) chloride is still recommended in some cases:[19]
Cuprous chloride also catalyzes the dimerization of acetylene to vinylacetylene, once used as a precursor to various polymers such a neoprene.[20]
Niche uses
CuCl is used as a catalyst in atom transfer radical polymerization (ATRP). It is also used in pyrotechnics as a blue/green coloring agent. In a flame test, copper chlorides, like all copper compounds, emit green-blue.[21]
Reactions
Upon contact with water, copper(I) chloride slowly undergoes disproportionation:[22]
- 2 CuCl → Cu + CuCl2
In part for this reason, samples in air assume a green coloration.[23]
Copper(I) chloride is a Lewis acid. It is classified as soft according to the hard-soft acid-base concept. Thus, it forms a series of complexes with soft Lewis bases such as triphenylphosphine:
- CuCl + 1 P(C6H5)3 → 1/4 {CuCl[P(C6H5)3]}4
- CuCl + 2 P(C6H5)3 → CuCl[P(C6H5)3)]2
- CuCl + 3 P(C6H5)3 → CuCl[P(C6H5)3)]3
CuCl also forms complexes with halides. For example H3O+ CuCl2− forms in concentrated hydrochloric acid.[24] Chloride is displaced by CN− and S2O32−.[10]
Solutions of CuCl in HCl absorb carbon monoxide to form colourless complexes such as the chloride-bridged dimer [CuCl(CO)]2. The same hydrochloric acid solutions also react with acetylene gas to form [CuCl(C2H2)]. Ammoniacal solutions of CuCl react with acetylenes to form the explosive copper(I) acetylide, Cu2C2. Alkene complexes of CuCl can be prepared by reduction of CuCl2 by sulfur dioxide in the presence of the alkene in alcohol solution. Complexes with dienes such as 1,5-cyclooctadiene are particularly stable:[25]
History
Copper(I) chloride was first prepared by Robert Boyle and designated rosin of copper in the mid-seventeenth century from mercury(II) chloride ("Venetian sublimate") and copper metal:[26]
- HgCl2 + 2 Cu → 2 CuCl + Hg
In 1799, Joseph Proust first differentiated two different chlorides of copper. He prepared CuCl (which he called white muriate of copper) by heating CuCl2 at red heat in the absence of air, causing it to lose half of its combined chlorine followed by removing residual CuCl2 by washing with water.[27]
An acidic solution of CuCl was formerly used to analyze carbon monoxide content in gases, for example in Hempel's gas apparatus where the CuCl absorbs the carbon monoxide.[28] This application was significant during the nineteenth and early twentieth centuries when coal gas was widely used for heating and lighting.[29]
Gallery
White copper(I) chloride crystals on copper wire
Copper(I) chloride partially oxidized in air
IR absorption spectrum of copper(I) chloride
chloride_crystal_01.jpg)
_chloride.jpg)
_chloride.png)
