LSWR E14 class

Drummond's 4-6-0 F13 class had been withdrawn from the heavy boat train services they were designed to undertake, as they were heavy on coal and water and man-hours in terms of upkeep.^{[1][page needed]}. The LSWRs immediate traffic needs were adequately covered by their 4-4-0 designs, however, the problem of continually accelerating timetables to the South Coast ports remained.^{[1][page needed]}

It was clear that another design was needed due to their faster speeds and inherent power-to-weight ratio.^{[1][page needed]}, as well as the LSWR's passenger requirements needing longer, heavier rolling stock to keep maintain faster point-to-point schedules.^{[1][page needed]}

Drummond again settled on the 4-6-0 wheel arrangement in anticipation of longer and faster trains in the future.^[2] A 175 psi (1,210 kPa) saturated boiler was utilised, able to maintain the steam needed for four simple-expansion cylinders and 6 ft 0 in (1.83 m) driving wheels, an improvement over the F13 class.^{[1][page needed]} The class was equipped with Walschaerts valve gear for both inside and outside the frames, therefore simplifying the design in respect to maintenance and overhauls.^[2] While Drummond had been given authorisation to build five, only a single E14 class was built.

Under the LSWR, the E14 was painted in LSWR Passenger Sage Green livery with purple-brown edging, creating panels of green.^{[1][page needed]} This was further lined in white and black with 'LSWR' in gilt on the tender tank sides.

The E14 was originally intended for expresses between Salisbury and Exeter, but were unsuccessful and only ran them for one year.^{[1][page needed]} It saw more success on the less-difficult coal trains between between Salisbury and Southampton. The E14 had a high coal consumption and was nicknamed the "Turkey" as a result.^{[3][page needed]}