Zener pinning

The figure illustrates a boundary intersecting with an incoherent particle of radius ${\displaystyle r}$. The pinning force acts along the line of contact between the boundary and the particle, i.e., a circle of diameter ${\displaystyle AB=2\pi r\cos \theta }$. The force per unit length of boundary in contact is ${\displaystyle \gamma \sin \theta }$, where ${\displaystyle \gamma }$ is the interfacial energy. Hence, the total force acting on the particle-boundary interface is

${\displaystyle F=2\pi r\gamma \cos \theta \sin \theta }$

The maximum restraining force occurs when ${\displaystyle \theta =45^{\circ }}$, so ${\displaystyle F_{max}=\pi r\gamma }$.

In order to determine the pinning force resulting from a given dispersion of particles, Clarence Zener made several important assumptions:

• The particles are spherical.
• The passage of the boundary does not alter the particle-boundary interaction.
• Each particle exerts the maximum pinning force on the boundary, regardless of contact position.
• The contacts between particles and boundaries are completely random.
• The number density of particles on the boundary is that expected for a random distribution of particles.

For a volume fraction, ${\displaystyle F_{v}}$, of randomly distributed spherical particles of radius ${\displaystyle r}$, the number or particles per unit volume (number density) is given by

${\displaystyle N_{total}={\frac {3F_{v}}{4\pi r^{3}}}.}$

From this total number density, only those particles that are within one particle radius will be able to interact with the boundary. If the boundary is essentially planar, then this fraction will be given by

${\displaystyle N_{interact}=2rN_{total}={\frac {3F_{v}}{2\pi \ r^{2}}}.}$

Given the assumption that all particles apply the maximum pinning force, ${\displaystyle F_{max}}$, the total pinning pressure exerted by the particle distribution per unit area of the boundary is

${\displaystyle P_{s}=N_{interact}F_{max}={\frac {3F_{v}\gamma \ }{2r}}.\,\!}$

This is referred to as the Zener pinning pressure. It follows that large pinning pressures are produced by:

• Increasing the volume fraction of particles
• Reducing the particle size

The Zener pinning pressure is orientation dependent, which means that the exact pinning pressure depends on the amount of coherence at the grain boundaries.

Particle pinning has been studied extensively with computer simulations, such as Monte Carlo and phase field methods. These methods can capture interfaces with complex shapes and provide better approximations for the pinning force.

• According to Current issues in recrystallization: a review, R.D. Doherty et al., Materials Science and Engineering A238 (1997), p 219-274
• For information on zener pinning modeling see:

- "Contribution à l'étude de la dynamique du Zener pinning: simulations numériques par éléments finis", Thesis in French (2003). by G. Couturier.
- "3D finite element simulation of the inhibition of normal grain growth by particles". Acta Materialia, 53, pp. 977–989, (2005). by G. Couturier, R. Doherty, Cl. Maurice, R. Fortunier.
- "3D finite element simulation of Zener pinning dynamics". Philosophical Magazine, vol 83, n° 30, pp. 3387–3405, (2003). by G. Couturier, Cl. Maurice, R. Fortunier.