0-4-0+4
Locomotive wheel arrangement
From Wikipedia, the free encyclopedia
Under the Whyte notation for the classification of steam locomotives, 0-4-0+4 represents the wheel arrangement of no leading wheels, four powered and coupled driving wheels on two axles and four trailing wheels on two axles mounted in a bogie.
Front of locomotive at left | |||||||||||||
 Cape Government Railways Railmotor | |||||||||||||
| |||||||||||||
| |||||||||||||
Overview
The 0-4-0+4 wheel arrangement was usually found on railmotors, vehicles for passenger carrying that operated on routes where passenger numbers were light. It usually consisted of a single coach with its own prime mover. William Bridges Adams in the United Kingdom began building railmotors in small numbers as early as 1848.
Usage
Cape of Good Hope
A single Railmotor was delivered to the Cape Government Railways (CGR) in 1906. The railmotor was a self-contained motor-coach in which the locomotive and coach were embodied in a single vehicle, with a driver's station at the rear end of the coach for reverse running. The locomotive part was a 0-4-0 side-tank engine which was built by North British Locomotive Company, while the coach part on a single bogie was built by Metropolitan Amalgamated Railway Carriage & Wagon.[1][2]
Transvaal Colony
In 1907, the Central South African Railways (CSAR) acquired a single self-contained railmotor for the low-volume railmotor passenger service which had been introduced the previous year. It was a self-contained motor-coach with a 56-seat capacity in which the engine, boiler and coach were embodied in a single vehicle. While the engine part of the vehicle was built by Kitson & Co, the 46 feet 11 inches (14,300 millimetres) long coach part was constructed by Metropolitan Amalgamated Railway Carriage & Wagon. To negotiate curves and points, the power unit could pivot like a bogie. The railmotor was erected at the Salt River shops of the CGR in Cape Town and entered service on the CSAR on 10 August 1907.[3][4][5]