Antelope Reservoir
From Wikipedia, the free encyclopedia
| Antelope Reservoir | |
|---|---|
 Morning at Antelope Reservoir | |
  Antelope Reservoir Location of Antelope Reservoir in Oregon, USA.  Antelope Reservoir Antelope Reservoir (the United States) | |
| Location | Malheur County, Oregon |
| Coordinates | 42°54′24″N 117°14′09″W / 42.90667°N 117.23583°W |
| Type | reservoir, eutrophic |
| Primary inflows | Jack Creek, Antelope Feeder Canal from Jordan Creek, intermittent streams |
| Primary outflows | Jack Creek |
| Catchment area | 638 square miles (1,650 km2) |
| Basin countries | United States |
| Built | 1913–1914 |
| Surface area | 3,285 acres (1,329 ha) |
| Average depth | 8 feet (2.4 m) |
| Max. depth | 25 feet (7.6 m) |
| Water volume | 26,300 acre-feet (32.4×106 m3) |
| Shore length1 | 17 miles (27 km) |
| Surface elevation | 4,318 feet (1,316 m) |
| Settlements | Jordan Valley |
| References | [1][2][3] |
| 1 Shore length is not a well-defined measure. | |
Antelope Reservoir is a large body of water impounded for irrigation in a semi-arid region of southeastern Oregon in the United States. Located near the small city of Jordan Valley in Malheur County, it is about 10 miles (16 km) west of Oregon's border with Idaho. Although the lake is formed by a dam across Jack Creek, most of the water enters the reservoir via the Antelope Feeder Canal. It diverts water to the reservoir from nearby Jordan Creek at a point near the Idaho border. Jack Creek, which carries minor outflows from the reservoir, empties into Jordan Creek further downstream.[1]
The lake was originally formed by a 42-foot (13 m) high dam, built in 1913–14, on Jack Creek. At that time, the water in the reservoir came from intermittent surface streams. The dam, managed by the Jordan Valley Irrigation District, was raised to 80 feet (24 m) in 1933, and in addition to the intermittent flows the higher dam impounds water from Jordan Creek. The water is used to irrigate about 12,000 acres (4,900 ha) of farmland downstream of the lake.[1]