Carousel feeding
From Wikipedia, the free encyclopedia

Carousel feeding is a cooperative hunting method used by Norwegian orcas (Orcinus orca) to capture wintering Norwegian spring-spawning herring (Clupea harengus).[1] The term carousel feeding was first used to describe a similar hunting behaviour in bottlenose dolphins (Turslops truncatus) in the Black Sea.[2] There are two main phases of carousel feeding in orcas, the herding phase and the feeding phase. In the herding phase the orcas surround a school of herring and herd them into a tight ball. They tighten the ball by blowing bubbles, flashing their white underside and slapping their tails on the surface. They move the ball of herring toward the surface of the water before initiating the feeding phase. During the feeding phase several orcas begin to eat while the others continue herding the fish to maintain the ball. The feeding orcas whip their tails into the ball to stun and kill several herring at a time. The dead and stunned herring are then consumed and their heads and spines discarded.[2]

Carousel feeding begins when an orca pod locates a school of herring. This is primarily done by echolocation. Orcas can detect herring at a much greater distance than the herring can detect the predator. This gives the orcas an advantage over the herring.[2] The matriarch orca leads the pod (group of 3–9 orcas) in splitting the herring school into a smaller more manageable group. The orcas then circle the herring forcing them into a ball shape.[3] The diameter of the tight ball can range anywhere between two and seven meters.[4] During this period the orcas are highly vocal including clicks[5] and whistling.[2] While tightening the herring ball the orcas push their prey towards the surface of the water. It has been speculated that surface feeding is beneficial because the animals do not have to deep dive so energy is saved, and since the pressure is less intense each tail strike is more effective.[3] In addition, the light conditions are better so the orcas can be more accurate, and the sea surface provides a barrier for the prey.[6] During the herding process herring can be seen jumping at the sea surface. The final stages of herding include blowing bubbles to tighten the ball, flashing the orca's white underbelly to blind and disorient the herring, and slapping the sea surface with their tails.[7] Once the herring are tightly compacted into a conical or elliptical shape near the surface the feeding stage begins.[2]
Feeding
The second stage of carousel is when the orcas get to consume their prey. A portion of the pod feeds while the rest continues herding; after a while the roles switch so all the orcas in the pod get a chance to feed. There are always more orcas herding than there are feeding to ensure the herring ball stays tight.[2] The feeding orcas whip their tails into the herring to stun and kill them. The stunning is a result of the loud noise and physical contact of the tail and the fish.[7] In addition, the fish are debilitated by the pressure change and turbulence which makes it easy for the orcas to catch them.[8] The orcas consume the stunned and dead herring and spit out the heads and spines.[2] The orcas can catch and kill up to 15 herring with each successful slap. Once the orcas are satisfied they release the remaining herring. A carousel feeding event can last from ten minutes to three hours depending on the herring available and the number of orcas in the pod, as well as environmental conditions.[3]