Franziszeischer cadastre

The cadastre, created between 1817 and 1861, is named after Emperor Franz I, who initiated the survey through the Land Tax Patent of December 23, 1817. It initially covered the Austrian lands (Cisleithania), mapping 300,082 km² on hand-drawn,^[1] colored sheets measuring 20 × 25 inches (≈ 53 × 66 cm). Each sheet covers 500 yokes, with approximately 50 million properties in 30,000 cadastral municipalities recorded on 164,357 map sheets. Austria's current territory is covered on 53,212 sheets.^[2]

Cadastral maps use a scale of one Austrian inch to 40 fathoms (1:2880),^{[Note 1]} based on the contemporary military scale of 1 inch to 1000 steps (1:28,800).^{[1][Note 2]} Local areas were mapped at 1:1440 or, rarely, 1:720, and mountainous areas at 1:5760.^[3] Lengths are in inches and fathoms, areas in square fathoms or yards, with one square inch equaling one yard in reality.^{[Note 3]} Post-1870, metric scales were added to older maps. The cadastral register lists properties, owners, houses, real estate, land ownership, cultivated land, reed beds, and name directories.^{[citation needed]}

The Hungarian lands (Transleithania: Hungary, Transylvania, Croatia, etc.) were surveyed from 1850 without colored sheets, covering 670,000 km².^[2]

Predecessors include tax assessments^{[Note 4]} under Maria Theresa and the Josephinisches Lagebuch of Joseph II (1785–1789),^{[Note 5]} based on his tax and urbarial patent. Abolished in 1790, it served as a provisional land tax until the Franziszeische Kataster.^[4] Preparatory work began in 1806, formalized by the Grundsteuerpatent of December 23, 1817,^[5] which taxed land based on yield, not ownership or effort, ensuring a stable tax burden independent of weather or diligence. It recorded parcels, cadastral communities, provinces, and the entire empire.^{[citation needed]}

Land parcels in each cadastral municipality were recorded using trial table surveys by the military, adopting advanced methods as work progressed.^[6] Survey periods for modern Austria include:

• Vienna and Lower Austria: 1817–1824
• Upper Austria and Salzburg: 1823–1830
• Styria: 1820–1825
• Carinthia: 1822–1828
• Burgenland (then German West Hungary): 1853–1858
• Tyrol and Vorarlberg: 1855–1861^[1]

Without initial triangulation, local coordinate systems were established with origins at:^{[citation needed]}

• South tower of St. Stephen's Cathedral for Vienna, Lower Austria, Moravia, and Austrian Silesia
• Gusterberg near Kremsmünster for Upper Austria, Salzburg, and Bohemia
• Schöckl near Graz for Styria
• Krimberg near Ljubljana for Carinthia, Carniola, and the Coastal Region^[7]
• South tower of the parish church in Innsbruck for Tyrol and Vorarlberg
• East tower of the Budapest observatory for Hungary, including Burgenland^[3]

Municipal boundaries were defined in a boundary sketch. Landowners marked property boundaries with stones, pegs, cairns, or pits and distinguished land use types (meadows, fields, vineyards, etc.). Surveyors recorded these boundaries, simplifying crop boundaries within properties while preserving shape and area. Less emphasis was placed on tax-free or low-taxed areas, and minor buildings were sometimes omitted.^[8]

Data, including ownership, were recorded in a "field sketch," detailed in an "indication sketch," and finalized in winter. Plot numbers were assigned after commission re-surveying. The 1824 Cadastral Survey Instruction (KVI)^[9] guided the process, with surveyors financing equipment and liable for errors.^[8][10][11] The 1883 Cadastral Evidence Act mandated triennial reviews.

Initially, building plots used black numbers, others red. From 1865, uniform black numbering was adopted, with building plots prefixed by a dot (e.g., ".21" vs. "21"), a convention persisting in modern land registers, potentially causing confusion.^[12]

The cadastre's core, the "original folder," contains hand-colored drawings in a cardboard cover, with surveyors' names and a title page detailing location, administrative affiliation, and scales. Smaller municipalities may share folders.^{[citation needed]}

After the monarchy's dissolution, cadastral records were transferred to successor states (Italy, Slovenia, Hungary, Slovakia, Czechia, Poland, Croatia, Romania, Ukraine). Austria's original map is held at the Federal Office of Metrology and Surveying in Vienna, protected under the Hague Convention, viewable only with supervision and gloves. Yellow stains on map backs are from egg white glue, not dirt.^[13]

Duplicates in state archives vary in sheet numbering and layout, often omitting "flaps" (appendices). Rectification versions and city compilations reflect later updates, some uncolored. Lithographic prints may lack full details.^{[citation needed]}

The Austrian Urmappe is largely digitized. By 2008, the Federal Office of Metrology and Surveying planned to digitize all sheets, each 20–30 megabytes at 300 dpi. Linked image files are edited, often reduced in quality.^{[citation needed]}

The cadastre focuses on the valuation of real estate: all plots of land are recorded, even if they were unproductive (barren), as well as information about the type of construction of houses: wooden houses are coloured yellow, stone houses pink, and public buildings (churches, offices, etc.) red. Pasture land is divided into communal pasture (GW) and pasture (W) and coloured pale green. Meadows are coloured a stronger shade of green. Fields are light brown and vineyards are coloured pink. In addition to the colour, the crops are indicated by small symbols (vines, chestnut trees, etc.).^{[citation needed]}

Updating the cadastre already encountered major difficulties in the 19th century: there was no guarantee that changes in the property portfolio would actually be passed on to the cadastral authorities, and apart from that, constant updating of the sheets was almost impossible due to low staffing levels.^[14] In addition, when land areas were separated and subsequently measured more accurately according to later rules, previous errors had a greater impact on the remaining land (remaining area problem): If 500 m² are precisely measured and separated from a plot of land measuring 1000 m² (according to the cadastre), which in reality only measures 980 m² (2% error), 480 m² remain as 'residual area' (4%, thus double the error).^[15] If the completeness of this residual area is decisive for the existence of a right (e.g. private hunting rights, 200 yokes = 115 ha), this can lead to the loss of this right. Courts have repeatedly rejected liability on the part of cadastral authorities for such errors, pointing out that the aim of the cadastre is not to provide a binding representation of areas.^[16]

The cadastral maps are not a substitute for land maps: transport links and streams are usually only marked if the road or stream bed forms its own plot of land (parcel). In the original map, this is only the case for state roads (chausseen) and other important connecting routes. In later editions of the cadastral map, more emphasis was placed on showing these connections (see, for example, the changes marked in red in the image on the right around St. Oswald's Church and around the Stephlbauer farm). Changes to municipal boundaries are noted by hand in the original map.^{[citation needed]}

The cadastral register does not contain any information on elevation, such as fixed points, contour lines, hatching or shading, nor does it contain any information on the slope of land areas.^{[citation needed]}

Investigations in open terrain suggested an average error of 80 cm, and even more in unfavourable terrain.^[17] The average line thickness of 0.15 mm alone results in a maximum accuracy of around 40 cm at the usual scale of 1:2880. Despite careful storage, changes (shrinkage, warping) in the (handmade) paper of the cadastral sheets are to be expected.^[18] The representation in the cadastre may therefore show deviations in the range of metres for length specifications and up to 20 per cent for area specifications.^{[Note 6]}

To obtain reliable information about the cadastre's status at a specific point in time, it may be necessary to consult the original map, any subsequent (rectified) versions, the working records of the surveying officials, and the copies held in the relevant provincial archives. If the boundaries and areas of a property have not been re-measured using modern methods since its registration in the Franziszeischer Kataster, information from the early 19th century may still be found in the land registers and land register extracts of the 21st century. In today's Austria, half of all properties have reportedly never been re-measured since their registration in the cadastre.^{[Note 6]}

• List of maps
• Franzisco-Josephinian survey
• Franziszeische Landesaufnahme
• Valid
• Josephinian survey
• Legal cadastre

The original map for the territories of Austria is kept in the cadastral map archive at the Federal Office of Metrology and Surveying. The other sheets were handed over to the successor states. The originals of the Franziszeische Landesaufnahme, 2,628 map sheets and derived maps, are available at the Austrian State Archives/War Archives.

Digitised versions online:

• Cadastral surveying instructions^[19]
• Cadastral Records Act 1883^[20]

Regional:

• Cadastral maps from the duplicate folder for the province of Upper Austria (map layer at DORIS intermap)^[21]
• Cadastral maps from the original folder for the province of Vorarlberg, as of 1857 (map layer at VOGIS)^[22]
• Cadastral maps for Bohemia, Moravia and Austrian Silesia from the Central Archive for Land Surveying and Cadastre (ZALK)^[23]

Wikimedia Commons has media related to Franciscan Cadastre.

• Historical Cadastre – Original Map. In: bev.gv.at. Federal Office of Metrology and Surveying, Vienna, accessed on March 24, 2024 .
• Historical cadastre. At: familia-austria.at. (Overview by country, links to online maps).
• Cadastral maps. Habsburg Monarchy – Franziszeisch Cadastre. In: arcanum.com (formerly mapire.eu). (Online view of the Franziszeisch Cadastre).

Legend:

• Regulations for drawing cadastral plans (image file on DORIS, doris.ooe.gv.at)

Regional:

• Cadastre in the state of Lower Austria (Lower Austrian State Archives)
• Cadastre in the province of Upper Austria (DORIS, Layer Urmappe , various map themes, such as First State Surveys , Urmappe quality especially topic Urmappe or Cultural Atlas ); Information
• Cadastre in the State of Salzburg (SAGIS)