HDMS Herluf Trolle (1899)

From Wikipedia, the free encyclopedia

NameHerluf Trolle
Laid down20 July 1897
Launched2 September 1899
Painting of Herluf Trolle c. 1902
History
Denmark
NameHerluf Trolle
BuilderOrlogsværftet
Laid down20 July 1897
Launched2 September 1899
Stricken30 April 1932
FateSold for scrap, 1934
General characteristics
Displacement3,494 long tons (3,550 t)
Length82.88 m (271 ft 11 in) pp
Beam15.06 m (49 ft 5 in)
Draft4.93 m (16 ft 2 in)
Installed power
Propulsion
Speed15.5 knots (28.7 km/h; 17.8 mph)
Complement254
Armament
Armor

HDMS Herluf Trolle was the lead ship of the Herluf Trolle class of coastal defense ships built for the Royal Danish Navy. The Herluf Trolle class was built in response to a naval construction program in neighboring Imperial Germany. The Danish ships were built in the late 1890s and early 1900s. They were armed with a main battery of two 240 mm (9.4 in) guns and were capable of a top speed of 15.5 knots (28.7 km/h; 17.8 mph). Because she was intended to operate as part of a solely defensive naval strategy, Herluf Trolle had a fairly uneventful career. She visited Britain in 1902 to represent Denmark at the coronation of Edward VII and Alexandra. During World War I, Denmark remained neutral and Herluf Trolle was assigned to the defense forces that guarded Danish territorial waters. Sharply reduced naval budgets in the 1920s and 1930s curtailed further activities, and in 1932, she was discarded for scrap.

Characteristics

By the end of the 19th century, which had seen Denmark's decline from a major navy before the devastating Battle of Copenhagen in 1801 to a minor coastal defense force by the 1890s, the Royal Danish Navy was primarily concerned with countering the naval strength of its neighbor, Imperial Germany. In the early 1890s, the Germans had completed eight coastal defense ships of the Siegfried and Odin classes, prompting the Danish government to consider strengthening their fleet in 1894 in response. As work on the design began, the designers reviewed the lessons of the First Sino-Japanese War, which was fought over the course of 1894 and into 1895. Funds for the first ship, Herluf Trolle, were authorized in 1896. At that time, Denmark's naval strategy was entirely defensive; the coastal defense ships like Herluf Trolle were intended to guard the island of Zealand (where the capital at Copenhagen lay) in combination with coastal artillery batteries, and defensive minefields, and to support flotillas of torpedo boats in the confined waters of the Danish Straits.[1]

Plan and profile of the Herluf Trolle class

Herluf Trolle was 82.88 m (271 ft 11 in) long between perpendiculars, with a beam of 15.06 m (49 ft 5 in) and an average draft of 4.93 m (16 ft 2 in). She displaced 3,494 long tons (3,550 t) as designed. As the ships were intended to operate in Denmark's shallow coastal waters, they had a low freeboard. They had a shore forecastle forward to improve seakeeping. Herluf Trolle had a fairly large superstructure that included an armored conning tower. Her crew amounted to 254 officers and enlisted men.[2]

The ship was powered by a pair of triple-expansion steam engines that drove a pair of screw propellers. Steam for the engines was provided by six coal-burning water-tube boilers, which were vented through a single funnel placed amidships.[3] The ship's propulsion system was rated to produce 4,200 indicated horsepower (3,100 kW) for a top speed of 15.5 knots (28.7 km/h; 17.8 mph).[2]

The ship's armament was centered on a main battery of two 240 mm (9.4 in) 40-caliber guns mounted individually in gun turrets, one forward and the other aft. These were supported by a secondary battery of four 150 mm (5.9 in) 43-caliber guns, which were placed in casemates in the side of the hull. Close-range defense against torpedo boats was provided by a light battery of ten 6-pounder guns, three 1-pounder Hotchkiss revolver cannon, and eight 1-pounder automatic guns. She also carried three 457 mm (18 in) torpedo tubes.[2]

Armor protection consisted of Krupp cemented steel. The ship's armor belt was 178 to 203 mm (7 to 8 in) thick, and it connected to her armor deck that was 51 mm (2 in). Above the deck, the sides of the superstructure, where the 150 mm guns were housed, received 180 mm (7 in) of armor plate. Her main battery turrets received 170 to 190 mm (6.5 to 7.5 in) of armor plate on their faces and sides.[2][4]

Service history

Notes

References

Related Articles

Wikiwand AI