Italian corvette Flavio Gioia
From Wikipedia, the free encyclopedia
 Flavio Gioia, date unknown | |
| Class overview | |
|---|---|
| Name | Flavio Gioia |
| Operators | Regia Marina (Royal Navy) |
| Preceded by | Cristoforo Colombo |
| Succeeded by | Amerigo Vespucci |
| Completed | 1 |
| History | |
| Builder | Regio Cantiere di Castellammare di Stabia |
| Laid down | 26 June 1879 |
| Launched | 12 June 1881 |
| Completed | 26 January 1883 |
| Fate | Discarded, 10 September 1920 |
| General characteristics | |
| Type | Screw corvette |
| Displacement | 2,493 long tons (2,533 t) |
| Length | 78 m (255 ft 11 in) pp |
| Beam | 12.78 m (41 ft 11 in) |
| Draft | 5.19 m (17 ft) |
| Installed power |
|
| Propulsion |
|
| Speed | 14 knots (26 km/h; 16 mph) |
| Complement | 268 |
| Armament |
|
Flavio Gioia was a screw corvette of the Italian Regia Marina (Royal Navy) built in the late 1870s and early 1880s.
Characteristics
The design for Flavio Gioia was prepared by the naval engineer Carlo Vigna; the ship was the first steel-hulled cruising vessel of the Italian Regia Marina (Royal Navy).[1] The Italian navy still largely relied on a fleet of old wooden-hulled cruising ships built in the 1850s and 1860s, but by the 1870s, the world's navies had begun to move to steel construction. The Italians responded with Flavio Gioia and the similar Amerigo Vespucci as part of a modest program to modernize its cruising fleet.[2] The two vessels were similar enough that some sources consider them to have been the same class,[3][4] though others consider them to be distinct designs.[1]
The ship was 78 meters (255 ft 11 in) long between perpendiculars, and she had a beam of 12.78 m (41 ft 11 in) and an average draft of 5.19 m (17 ft). She displaced 2,493 long tons (2,533 t). The ship had a traditional clipper bow and an overhanging stern. Her superstructure was minimal, consisting primarily of a small conning tower placed amidships. She had a crew of 268.[1]
Her propulsion system consisted of a single horizontal, 3-cylinder compound steam engine that drove a single screw propeller. Steam was supplied by eight coal-fired fire-tube boilers that vented into a single funnel located amidships. Flavio Gioia could steam at a top speed of 14 knots (26 km/h; 16 mph) from 4,156 indicated horsepower (3,099 kW). The ship had a capacity to store 500 long tons (510 t) of coal for the boilers. To supplement the steam engines, she was fitted with a three-masted barque rig.[1][3]
The main battery for Flavio Gioia consisted of eight 149-millimeter (5.9 in) 40-caliber breech-loading guns, four guns per broadside. For close-range defense against torpedo boats, she carried a secondary battery of three 75 mm (3 in) guns. In 1892, she was rearmed with four 120 mm (4.7 in) 40 cal. guns and two 356 mm (14 in) torpedo tubes. The ship was protected by a curved armor deck that was 38 mm (1.5 in) thick, with a layer of extensively subdivided series of watertight compartments below, which was intended to control flooding in the event of damage below the waterline.[1][3]