LNWR Samson Class

From Wikipedia, the free encyclopedia

Power typeSteam
Power typeSteam
LNWR Samson Class
2154 Loadstone at Monument Lane locomotive depot
Type and origin
Power typeSteam
DesignerJohn Ramsbottom
BuilderCrewe Works
Serial number624–633, 680–689, 730–739, 780–789, 880–889, 1692–1701, 1842–1861, 2279–2288
Build dateMay 1863 – May 1879
Total produced90
Specifications
Configuration:
  Whyte2-4-0
  UIC1B n2
Gauge4 ft 8+12 in (1,435 mm)
Leading dia.3 ft 6 in (1.067 m)
Driver dia.6 ft 3 in (1.905 m)
Wheelbase:
  Engine14 ft 7 in (4.445 m)
  Leading7 ft 5 in (2.261 m)
  Coupled7 ft 2 in (2.184 m)
Loco weight26 long tons 2 cwt (26.5 t)
Water cap.1,500 imp gal (6,800 L; 1,800 US gal)
Boiler:
  Diameter3 ft 9+18 in (1.146 m)
  Tube plates9 ft 8+38 in (2.956 m)
Boiler pressure140 lbf/in2 (970 kPa; 9.8 kgf/cm2)
Heating surface1,083 sq ft (100.6 m2)
CylindersTwo, inside
Cylinder size16 in × 20 in (406 mm × 508 mm)
Valve gearStephenson
Performance figures
Tractive effort8,700 lbf (38.70 kN)
Career
OperatorsLondon and North Western Railway
WithdrawnSeptember 1889 – November 1894, 1914 - 1925
DispositionAll scrapped

The LNWR Samson Class was a class of ninety 2-4-0 steam locomotives[1] built by the London and North Western Railway at their Crewe Works between 1863 and 1879.

They were officially designated "Curved Link 6-ft Passenger" due to the use of Stephenson valve gear which included a curved expansion link between the fore and back eccentric rods (earlier LNWR designs had used the Allan valve gear which had a straight expansion link) and the use of 6-foot (1.829 m) diameter wheel centres, which, together with 1+12-inch (38 mm) thick tyres gave a driving wheel diameter of 6 feet 3 inches (1.905 m).[2]

Ostensibly a mixed traffic design, they were the first locomotives with coupled driving wheels to be allocated for passenger duties on the LNWR.

Fleet list

References

Related Articles

Wikiwand AI