Leslie Dam
Dam in Queensland, Australia
From Wikipedia, the free encyclopedia
The Leslie Dam is a concrete gravity dam across Sandy Creek, a tributary of the Condamine River, located in the epyonomous settlement of Leslie Dam, near Warwick, in the Southern Downs region of Queensland, Australia.[1][2] Completed in 1965 to form Lake Leslie,[3] the reservoir provides irrigation to approximately 124 square kilometres (48 sq mi) of farm land in the region, and supplies potable water to Warwick and surrounding settlements.
- Irrigation
- Potable water supply
- Recreation
| Leslie Dam | |
|---|---|
The dam in 2025 | |
Location of the dam in Queensland | |
![]() Interactive map of Leslie Dam | |
| Country | Australia |
| Location | Leslie Dam, near Warwick, Southern Downs Region, Queensland |
| Coordinates | 28°13′02″S 151°55′05″E |
| Purpose |
|
| Status | Operational |
| Opening date | 1965 |
| Built by | Water Resources Commission |
| Operator | SunWater |
| Dam and spillways | |
| Type of dam | Gravity dam |
| Impounds | Sandy Creek |
| Height (foundation) | 33 m (108 ft) |
| Height (thalweg) | 5.5 m (18 ft) |
| Length | 384–424 m (1,260–1,391 ft) |
| Elevation at crest | 473.63 m (1,553.9 ft) AHD |
| Width (crest) | 109.118 m (358.00 ft) |
| Dam volume | 114×103 m3 (4.0×106 cu ft) |
| Spillways | 7 |
| Spillway type | Radial gates (since 1986) |
| Spillway capacity | 5,960 m3/s (210,000 cu ft/s) |
| Reservoir | |
| Creates | Lake Leslie |
| Total capacity | 106,250 ML (86,140 acre⋅ft) |
| Catchment area | 603 km2 (233 sq mi) |
| Surface area | 1,288 ha (3,180 acres) |
| Maximum water depth | 28.9 m (95 ft) |
| Normal elevation | 466 m (1,529 ft) AHD |
Operated by SunWater, the dam was named after Patrick Leslie (1815–1881), an early settler in the region and the first person to buy land in Warwick.[2]
Overview

The dam wall is 33 metres (108 ft) high and in the range of 384 to 424 metres (1,260 to 1,391 ft) long.[a] The resultant reservoir has a capacity of 106,250 megalitres (86,140 acre⋅ft) when full, and covers 1,288 hectares (3,180 acres), drawing from a catchment area of 603 square kilometres (233 sq mi).[4][6]
The initial construction was completed in October 1965 and created a reservoir with 47,119 megalitres (38,200 acre⋅ft) of water storage capacity.[5] In 1986, the dam wall was raised by 3 metres (9.8 ft) and seven controlled hydraulic-operated radial gates were added to the spillway,[4] each 12.74 metres (41.8 ft) wide and 6.64 metres (21.8 ft) high.[5] The improvements resulted in more-than doubling the capacity of the reservoir to 106,250 megalitres (86,140 acre⋅ft).[5]

The dam's highest level was reached on 12 September 1988 when waters in the dam peaked at 20 centimetres (7.9 in) above the spillway.[7] The next highest level was 13 centimetres (5.1 in) above the spillway on 28 May 1990. On 11 February 1995, the dam reached its lowest level ever of 3% capacity.[7]
The Leslie Dam as part of spillway capacity upgrade program commenced in 2008 by SunWater to ensure a consistently high level of safety for the dams under their control.[8][9]
On 5 January 2011, the dam spilled for the first time in more than two decades and all seven floodgates were opened. Downstream of the dam, the Sandy Creek was flooded and the Cunningham Highway was forced to close. Warwick's mayor, Ron Bellingham, called on SunWater to reduce the flow of water from the dam, that was put into effect the following day.[7]
Recreation

On 21 October 2001, sculpltures of Patrick Leslie and his wife, Kate, were unveiled as part of the Centenary of Federation Celebrations and as a tribute to pioneering women. The sculptures are located near the dam wall.[10]
Freshwater fishing and water sports facilities are available on the reservoir.[2] A Stocked Impoundment Permit is required to fish in the dam.[11]
An upgrade of recreation facilities at Leslie Dam was announced in 2022 and completed in 2024.[12]
