Lindenberg 30

From Wikipedia, the free encyclopedia

LocationUnited States
Year1980
No. built3
Lindenberg 30
Development
DesignerPaul Lindenberg
LocationUnited States
Year1980
No. built3
BuilderLindenberg Yachts
RoleRacer
NameLindenberg 30
Boat
Displacement6,900 lb (3,130 kg)
Draft5.30 ft (1.62 m)
Hull
Typemonohull
Constructionfiberglass
LOA30.00 ft (9.14 m)
LWL27.00 ft (8.23 m)
Beam10.00 ft (3.05 m)
Engine typeinboard motor
Hull appendages
Keel/board typefin keel
Ballast3,000 lb (1,361 kg)
Rudderinternally-mounted spade-type rudder
Rig
Rig typeBermuda rig
I foretriangle height41.00 ft (12.50 m)
J foretriangle base12.00 ft (3.66 m)
P mainsail luff35.50 ft (10.82 m)
E mainsail foot11.00 ft (3.35 m)
Sails
Sailplanmasthead sloop
Mainsail area195.25 sq ft (18.139 m2)
Jib/genoa area246.00 sq ft (22.854 m2)
Total sail area441.25 sq ft (40.993 m2)

The Lindenberg 30 is an American sailboat that was designed by Paul Lindenberg as a lightweight racer and first built in 1980. It was raced in Midget Ocean Racing Club (MORC) competition.[1][2][3][4]

While only three boats were built over a three-year production run, the design was developed into the Wavelength 30, which was produced by W. D. Schock Corp in California from 1980 to 1981, with a further ten boats completed. The Wavelength 30 was named for the prototype Lindenberg 30, which was named Wavelength.[1][2][5][6]

The Lindenberg 30 was built by Lindenberg Yachts in the United States, from 1980 until 1983, with only three boats completed in that four year production run.[1][2][7][8]

Design

The Lindenberg 30 is a recreational keelboat, built predominantly of fiberglass. It has a masthead sloop rig, a near-plumb stem, a reverse transom, an internally mounted spade-type rudder and a fixed fin keel. It displaces 6,900 lb (3,130 kg) and carries 3,000 lb (1,361 kg) of ballast.[1][2]

The design has a hull speed of 6.96 kn (12.89 km/h).[2]

Operational history

See also

References

Related Articles

Wikiwand AI