Meizu X8

The back panel and screen are made of glass. The sides of the smartphone are made of aluminum.

At the bottom, there is a USB-C connector, a speaker, and a microphone stylized as a speaker. At the top, there is a 3.5mm audio jack. On the left side of the smartphone, there is a slot for two SIM cards. On the right side, there are volume control buttons and a power button. The fingerprint scanner is located on the back panel.

The Meizu X8 was available in 3 colors: Black, Blue, and White.

The smartphone is powered by a Qualcomm Snapdragon 710 processor and an Adreno 616 graphics processor.^[2]

The battery has a capacity of 3210 mAh and supports 24W fast charging using mCharge 4 technology.^[3]

The smartphone features a dual rear camera system consisting of a 12MP, f/1.9 wide-angle lens and a 5MP depth sensor with Dual Pixel phase detection autofocus. It can record video in 1080p at 30fps. The front-facing camera has a 20MP wide-angle lens with an aperture of f/2.0 and can record video in 1080p at 30fps.

The phone's display has an IPS LCD screen, sizing about 6.15 inches, a 2220 x 1080 resolution (Full HD+) with an aspect ratio of 18.5:9 with a pixel density of 401 ppi, and a notch for the proximity sensor, speaker, and front camera.

The smartphone was sold in configurations of 4/64 and 6/128 GB.

The smartphone was initially released with Flyme 7.1.7.0G, which was based on Android 8.1 Oreo. It was later updated to Flyme 8.1, built on Android 9 Pie. There were plans to upgrade the smartphone to Android 10, but due to a significant number of bugs, the update was canceled.^[4]