Oxygen plant

Oxygen finds broad application in various technological processes and in almost all industry branches. The primary oxygen application is associated with its capability of sustaining burning process, and the powerful oxidant properties.

Due to that, oxygen has become widely used in the metal processing, welding, cutting and brazing processes. In the chemical and petrochemical industries, as well as in the oil and gas sector oxygen is used in commercial volumes as an oxidizer in chemical reactions.

• Metal gas welding, cutting and brazing - The use of oxygen in gas-flame operations, such as metal welding, cutting and brazing is one of the most significant and common applications of this gas. Oxygen allows generating high-temperature flame in welding torches thus ensuring high quality and speed of work performance.

• Metal industry - Oxygen is heavily used in the metal industry where it helps to increase burning temperature by the production of ferrous and non-ferrous metals and significantly improve the overall process efficiency.

• Chemical and petrochemical industries - In the chemical and petrochemical industries, oxygen is widely used for oxidation of raw chemicals for recovery of nitric acid, ethylene oxide, propylene oxide, vinyl chloride and other important chemical compounds.

• Oil and gas industry - In the oil and gas industry, oxygen finds application as a means for viscosity improvement and enhancement of oil-and-gas flow properties. Oxygen is also used for boosting production capacity of oil cracking plants, efficiency of high-octane components processing, as well as for the reduction of sulfuric deposits in refineries.

• Fish farming - The use of oxygen in the fish farming helps increase the survival and fertility ratios and reduce the incubation period. Along with fish culture, oxygen is applied for shrimps, crabs and mussels rearing.

• Glass manufacture - In glass furnaces oxygen is effectively used for burning temperature increase and burning processes improvement.

• Waste management - The use of oxygen in incinerators allows significantly increased flame temperatures and eventually ensures enhanced cost efficiency and incinerator production capacity.

• Medicine - Medical oxygen therapy may be administered to patients for various reasons such as low oxygen saturation or to ease respiratory distress.

Gas separation by adsorption systems is based on differential rates of adsorption of the components of a gas mixture into a solid adsorbent.

The current means of gaseous oxygen production from air by the use of adsorption technology produce a high fraction of oxygen as their output. The mechanism of operation of a modern oxygen adsorption plant is based on the variation of uptake of a particular gas component by the adsorbent as the temperature and partial pressure of the gas is changed.

The gas adsorption and adsorbent regeneration processes may therefore be regulated by varying of the pressure and temperature parameters.

The oxygen plant flow process is arranged in such a way that highly absorbable gas mixture components are taken in by adsorbent, while low absorbable and non-absorbable components go through the plant. Today, there exist three methods of arranging the adsorption-based air separation process with the use of swing technologies: pressure (PSA), vacuum (VSA) and mixed (VPSA) ones. In the pressure swing adsorption flow processes, oxygen is recovered under above-atmospheric pressure and regeneration is achieved under atmospheric pressure. In vacuum swing adsorption flow processes, oxygen is recovered under atmospheric pressure, and regeneration is achieved under negative pressure. The mixed systems operation combines pressure variations from positive to negative.

The adsorption oxygen plants produce 5 to 5,000 normal cubic meters per hour of oxygen with a purity of 93-95%. These systems, designated for indoor operation, are set to effectively produce gaseous oxygen from atmospheric air.

An unquestionable advantage of adsorption-based oxygen plants is the low cost of oxygen produced in the cases where there are no rigid requirements to the product oxygen purity.

Structurally, the adsorption oxygen plant consists of several adsorbers, the compressor unit, pre-purifier unit, valve system and the plant control system.

A simple adsorber is a column filled with layers of specially selected adsorbents – granular substances preferentially adsorbing highly adsorbable components of a gas mixture.

Where gaseous oxygen purity is required at the level of 90-95% with the capacity of up to 5,000 Nm³ per hour, adsorption oxygen plants are the optimal choice. This oxygen purity may also be obtained through the use of systems based on the cryogenic technology; however, cryogenic plants are more cumbersome and complex in operation.

Some companies produce high-efficiency systems for oxygen production from atmospheric air with the help of membrane technology.

The basis of gas media separation with the use of membrane systems is the difference in velocity with which various gas mixture components permeate membrane substance. The driving force behind the gas separation process is the difference in partial pressures on different membrane sides.

A modern gas separation membrane used by GRASYS is no longer a flat plate, but is formed by hollow fibers. Membrane consists of a porous polymer fiber with the gas separation layer applied to its external surface. Structurally, a hollow fiber membrane is configured as a cylindrical cartridge representing a spool with specifically reeled polymer fiber.

Due to the membrane material high permeability for oxygen in contrast to nitrogen, the design of membrane oxygen complexes requires a special approach. Basically, there are two membrane-based oxygen production technologies: compressor and vacuum ones.

In the case of compressor technology, air is supplied into the fiber space under excess pressure, oxygen exits the membrane under slight excess pressure, and where necessary, is pressurized by booster compressor to the required pressure level. By the use of vacuum technology, a vacuum pump is used for the achievement of partial pressures difference.