Potassium cyanide

KCN is produced by treating hydrogen cyanide with an aqueous solution of potassium hydroxide, followed by evaporation of the solution in a vacuum:^[4]

HCN + KOH → KCN + H₂O

About 50,000 short tons (45,000,000 kg) of potassium cyanide are produced yearly.^[4]

In aqueous solution, KCN is dissociated into hydrated potassium (K⁺) ions and cyanide (CN^−) ions. As a solid, KCN has structure resembling sodium chloride: with each potassium ion surrounded by six cyanide ions, and vice versa. Despite being diatomic, and thus less symmetric than chloride, the cyanide ions rotate so rapidly that their time-averaged shape is spherical. At low temperature and high pressure, this free rotation is hindered, resulting in a less symmetric crystal structure with the cyanide ions arranged in sheets.^[11][12]

KCN and sodium cyanide (NaCN) are widely used in organic synthesis for the preparation of nitriles and carboxylic acids, particularly in the von Richter reaction. It also finds use for the synthesis of hydantoins, which can be useful synthetic intermediates, when reacted with a carbonyl compound such as an aldehyde or ketone in the presence of ammonium carbonate.^{[citation needed]}

KCN is used as a photographic fixer in the wet plate collodion process.^[13] The KCN dissolves silver where it has not been made insoluble by the developer. This reveals and stabilizes the image, making it no longer sensitive to light. Modern wet plate photographers may prefer less toxic fixers, often opting for sodium thiosulfate, but KCN is still used.^{[needs update]}

In the 19th century, cyanogen soap, a preparation containing potassium cyanide, was used by photographers to remove silver stains from their hands.^{[14]: 11 [15]: 73 }

Potassium cyanide is a potent inhibitor of cellular respiration, acting on mitochondrial cytochrome c oxidase, hence blocking oxidative phosphorylation. Lactic acidosis then occurs as a consequence of anaerobic metabolism. Initially, acute cyanide poisoning causes a red or ruddy complexion in the victim because the tissues are not able to use the oxygen in the blood. The effects of potassium cyanide and sodium cyanide are identical, and symptoms of poisoning typically occur within a few minutes of ingesting the substance: the person loses consciousness, and brain death eventually follows. During this period the victim may suffer convulsions. Death is caused by histotoxic hypoxia/cerebral hypoxia. The expected LD100 dose (human) for potassium cyanide is 200–300 mg while the median lethal dose LD50 is estimated at 140 mg.^[17]

Due to toxicity considerations, the disposal of cyanide is subject to stringent regulations. Industrial cyanide effluent is typically destroyed by oxidation using peroxysulfuric acid, hydrogen peroxide, sulfur dioxide/copper salts ("Inco process") or all three ("Combiox Process"). Use of sodium hypochlorite, traditional for laboratory-scale wastes, is impractical on a commercial scale. Hydrolysis at higher temperatures is highly effective, but requires specialized equipment. Lastly, cyanide wastes can be acidified for recovery of hydrogen cyanide.^[4]