Rakuto Maru

From Wikipedia, the free encyclopedia

NameRakuto Maru
Owner
Port of registry
History
Japan
NameRakuto Maru
Owner
Operator
Port of registry
BuilderUraga Dock Co, Uraga
Laid down13 April 1935
Launched20 July 1935
Completed15 September 1935
RefitNovember – December 1941
Homeport
Identification
Fatesunk by aerial bombing, 1944
General characteristics
Typecargo ship
Tonnage2,962 GRT, 1,723 NRT
Length297.9 ft (90.8 m)
Beam45.0 ft (13.7 m)
Depth23.8 ft (7.3 m)
Decks2
Installed power
Propulsion1 × screw
Speed13.9 knots (26 km/h)
Notessister ships: Daido Maru; Ryuko Maru

Rakuto Maru was a cargo steamship that was built in Japan in 1935. The Imperial Japanese Army requisitioned her in 1937, and used her in the Second Sino-Japanese War. The Imperial Japanese Navy requisitioned her in 1941. In 1942 she took part in the invasion of Tarakan. In 1943 she survived hitting a mine, and she aided the cruiser Aoba after a USAAF air raid crippled her. She was sunk in the Philippines in 1944 by US Navy aircraft that attacked the convoy in which she was sailing. 199 of the people aboard her were killed.

Rakuto Maru was the first of a series of ships that the Uraga Dock Company of Uraga, Kanagawa equipped with a new propulsion system, which used reduction gearing not only for an exhaust steam turbine, but also for a high-speed reciprocating steam engine. Uraga went on to build numerous other ships with the same propulsion system, including at least ten of the same class as Rakuto Maru.

In 1935 the Uraga Dock Company launched three sister ships for Osaka Shōsen KK.[1] Rakuto Maru was the first. Her keel plates were laid on 13 April 1935; she was launched on 20 July; and completed on 15 September.[2] She was followed by Daido Maru, which was launched on 19 August;[3] and Ryuko Maru, which was launched on 21 November.[4] The three ships were built to the same design as Sinkyo Maru and Seikyo Maru,[5] which Uraga had built for Chōsen Yusen KK between 1932 and 1934; but with a different propulsion system.[6][7][8]

Rakuto Maru's length was 297.9 ft (90.8 m); her beam was 45.0 ft (13.7 m); and her depth was 23.8 ft (7.3 m). Her tonnages were 2,962 GRT and 1,723 NRT.[6] She had a raked bow, cruiser stern, and well decks fore and aft. She had two masts, and her engine room; boiler room; superstructure; and single funnel were amidships.

Main engines

Rakuto Maru had one screw; driven by two engines. A four-cylinder compound engine drove her propeller shaft via single reduction gearing. Exhaust steam from the low-pressure cylinders of the reciprocating engine drove an exhaust steam turbine, which drove the same propeller shaft, but via double reduction gearing. The combined power of her two engines was rated at 109 NHP,[6] or 2,000 ihp. It gave her a top speed of 13.9 knots (26 km/h); and a cruising speed of 11.5 knots (21 km/h).[1]

Reduction gearing allowed the engine to run several times faster than the propeller. This meant that the reciprocating engine could be much smaller and lighter than one that ran at the same speed as the propeller.[9] Rakuto Maru achieved almost the same performance with engines rated at 109 NHP as Sinkyo Maru did with a low-speed triple-expansion engine plus exhaust turbine,[10] which together were rated at 171 NHP.[11]

A British engineer, William Albert White, had invented a combination of a high-speed compound engine with single reduction gearing, and an exhaust steam turbine with double reduction gearing. In 1934 he had installed it in the cargo ship Adderstone,[12] and in 1935 he installed a smaller version in the fishing trawler White Pioneer.[13] At the same time as White Pioneer was being built, Uraga applied similar principles to Rakuto Maru and her two sisters.

From 1937 onward, Uraga built several more cargo ships to the same design as Rakuto Maru, and with the same combination of compound engine; exhaust turbine; and reduction gearing. In 1937, Yamabato Maru was completed for Yamashita Kisen KK, and Anshu Maru and Teishu Maru were completed for Chōsen Yusen KK.[14][15][16] In 1938, Nikkai Maru was completed for Nissan Kisen KK;[17] and Keiko Maru and Kanko Maru were completed for Osaka Shōsen KK.[18][19] In 1939, Sinko Maru and Zuiko Maru were completed for Toa Kaiun KK.[20][21]

Civilian and Army career

Rakuto Maru was registered in Osaka. Her wireless telegraph call sign was JZMH.[6] After her completion in September 1935, she made short-sea voyages twice a month for the rest of the year. One of these was to Rashin and Yuki in Chōsen, which are now Rason and Sonbong-guyok in North Korea.[2]

Early in 1937, the Japanese Army requisitioned Rakuto Maru. The Second Sino-Japanese War began that July, and Rakuto Maru remained in Army service until early 1939, when she was returned to her owners.[2]

On 12 August 1939, Toa Kaiun KK acquired Rakuto Maru.[22] Her registration was transferred to Tokyo,[2] although this was not recorded in Lloyd's Register until 1943.[23]

References

Bibliography

Related Articles

Wikiwand AI