SMS Kronprinz (1867)

From Wikipedia, the free encyclopedia

Preceded byFriedrich Carl
SucceededbyKönig Wilhelm
NameKronprinz
Illustration of Kronprinz in 1868
Class overview
Operators
Preceded byFriedrich Carl
Succeeded byKönig Wilhelm
History
Prussia, later German Empire
NameKronprinz
BuilderSamuda Brothers, London
Laid downFebruary 1866
Launched6 May 1867
Commissioned19 September 1867
FateScrapped in 1921
General characteristics
TypeArmored frigate
Displacement
Length89.44 m (293 ft 5 in)
Beam15.20 m (49 ft 10 in)
Draft7.85 m (25 ft 9 in)
Installed power
Propulsion
Sail planBarque-rigged
Speed13.5 knots (25.0 km/h; 15.5 mph)
Range3,200 nmi (5,900 km; 3,700 mi) at 10 knots (19 km/h; 12 mph)
Complement
  • 33 officers
  • 508 enlisted
Armament
ArmorBelt: 76 to 124 mm (3.0 to 4.9 in)

SMS Kronprinz[a] was a unique German ironclad warship built for the Prussian Navy in 1866–1867. Kronprinz was laid down in 1866 at the Samuda Brothers shipyard at Cubitt Town in London. She was launched in May 1867 and commissioned into the Prussian Navy that September. The ship was the fourth ironclad ordered by the Prussian Navy, after Arminius, Prinz Adalbert, and Friedrich Carl, though she entered service before Friedrich Carl. Kronprinz was built as an armored frigate, armed with a main battery of sixteen 21 cm (8.3 in) guns; several smaller guns were added later in her career.

Kronprinz saw limited duty during the Franco-Prussian War of 1870–1871. Engine troubles aboard the ship, along with the two other armored frigates in her squadron, prevented operations against the French blockade. Only two sorties in which Kronprinz participated were conducted, both of which did not result in combat. The ship served in the subsequent Imperial Navy until she was converted into a training ship for boiler room personnel in 1901. The ship was ultimately broken up for scrap in 1921.

General characteristics and propulsion

Following the acquisition of the small ironclad warships Arminius and Prinz Adalbert, which were only usable in coastal areas, the Prussian Navy sought to acquire armored vessels capable of operations on the high seas. The purpose of the new ships would be primarily directed against Prussia's primary naval rival, Denmark, which in the recent Second Schleswig War had imposed a blockade of German ports that Prussia had not been able to break. Ironclads were at that time a recent development and the only option for sea-going warships was the armored frigate, modeled on traditional sailing ships with a battery on the broadside. The navy requested approval from the Landtag (Parliament) in 1865 for an expanded budget to acquire the needed vessels, but the parliament refused, prompting King Wilhelm I to circumvent the legislature with a decree on 4 July authorizing the purchase of two armored frigates.[1]

At that time, Britain and France had the shipbuilders most experienced with the type, so the navy decided to order one vessel from each country. The contract for Kronprinz was placed on 13 January 1866, four days after that for Friedrich Carl, from Britain and France respectively. The British-built Kronprinz was modeled on the Defence and Hector classes.[2] The British naval architect Edward Reed designed the ship, and resulted in a vessel similar to Friedrich Carl.[3]

Kronprinz was 88.20 meters (289 ft 4 in) long at the waterline and 89.44 m (293 ft 5 in) long overall. She had a beam of 15.20 m (49 ft 10 in) and a draft of 7.85 m (25 ft 9 in) forward and 7.45 m (24 ft 5 in) aft. The ship was designed to displace 5,767 metric tons (5,676 long tons) at a normal loading, and up to 6,760 t (6,650 long tons) at full load. The ship's hull was constructed with transverse and longitudinal iron frames. It contained nine watertight compartments and a double bottom that ran for 43 percent of the length of the vessel. The ship was an excellent sea boat; the ship was responsive to commands from the helm but had a large turning radius. Steering was controlled with a single rudder. The ship's crew numbered 33 officers and 508 enlisted men. Kronprinz carried a number of smaller boats, including a large tender, two launches, a pinnace, two cutters, two yawls, and one dinghy.[4]

The ship's propulsion system was built by John Penn and Sons of Greenwich, England. A horizontal, two-cylinder single-expansion steam engine powered the ship. It drove a two-bladed screw 6.5 m (21 ft 4 in) in diameter. Eight trunk boilers, with four fireboxes in each, were divided into two boiler rooms. Each room was vented into its own funnel, which could be retracted while the ship was under sail. The boilers supplied steam to the engine at 2 standard atmospheres (200 kPa). The propulsion system was rated at 4,500 metric horsepower (4,400 ihp) and a top speed of 13.5 knots (25.0 km/h; 15.5 mph), though on trials Kronprinz managed to make 4,870 PS (4,800 ihp) and 14.7 knots (27.2 km/h; 16.9 mph). The ship carried up to 646 t (636 long tons) of coal, which enabled a maximum range of 3,200 nautical miles (5,900 km; 3,700 mi) at a cruising speed of 10 knots (19 km/h; 12 mph) and a range of 1,730 nmi (3,200 km; 1,990 mi) at 14 knots. A three-masted barque rig with a surface area of 1,980 square meters supplemented the steam engine.[4][5]

Armament and armor

As built, Kronprinz was equipped with a main battery of thirty-two rifled 72-pounder cannon. After her delivery to Germany, these guns were replaced with a pair of 21 cm (8.3 in) L/22 guns and fourteen 21 cm RK L/19 guns. The L/22 gun could depress to −5 degrees and elevate to 13 degrees, which provided a range of 5,900 m (6,500 yd). The shorter barreled L/19 guns had a wider range of elevation, from −8 to 14.5 degrees, but the shorter barrel imposed a lower muzzle velocity, which correspondingly reduced the range of the gun to 5,200 m (5,700 yd). The two types of gun fired the same shell, of which the total supply numbered 1,656 rounds of ammunition. The fourteen L/19 guns were placed in a central battery amidships, seven on either broadside. The L/22 weapons were placed on the upper deck on the centerline on either end of the ship as chase guns.[4][5]

Later in her career, six 3.7 cm (1.5 in) Hotchkiss revolver cannon in individual mounts were installed, along with five 35 cm (13.8 in) torpedo tubes.[3] Two of the tubes were placed in the bow, one on each broadside, and one in the stern on the port side. All were placed above water, and were supplied with a total of 12 torpedoes.[4]

Kronprinz's armor consisted of wrought iron backed with heavy teak planking. The iron component of the waterline armored belt ranged in thickness from 76 mm (3 in) in the stern to 124 mm (4.9 in) amidships and 114 mm (4.5 in) toward the bow. The entire belt was backed with 254 mm (10 in) of teak. Above the belt was a strake of iron plate that ranged in thickness from 114 to 121 mm (4.5 to 4.8 in) on 254 mm of timber, which protected the broadside battery. The battery's roof was protected by 9-millimeter-thick (0.35 in) iron plating, intended to deflect shots that passed over the side of the ship or fragments from explosions.[4]

Service history

Footnotes

References

Related Articles

Wikiwand AI