SMS Szigetvár

From Wikipedia, the free encyclopedia

NameSzigetvár
Laid down25 May 1899
Commissioned30 September 1901
Szigetvár
History
Austria-Hungary
NameSzigetvár
NamesakeSiege of Szigetvár
Laid down25 May 1899
Commissioned30 September 1901
FateCeded to Britain as a war prize; Scrapped, 1920
General characteristics
Class & typeZenta-class protected cruiser
Displacement
Length97.88 m (321 ft 2 in)
Beam11.93 m (39 ft 2 in)
Draft4.25 m (13 ft 11 in)
Installed power
Propulsion
Sail planBrigantine-rigged
Speed20 knots (37 km/h; 23 mph)
Range3,800 nmi (7,000 km; 4,400 mi) at 12 knots (22 km/h; 14 mph)
Complement308
Armament
Armor

SMS Szigetvár was a protected cruiser of the Zenta class, the third and final member of her class, which was built for the Austro-Hungarian Navy in the late 1890s. The class included two other vessels, Zenta and Aspern. The Zentas were intended to serve as fleet scouts and to guard the battleships against attacks by torpedo boats. They carried a main battery of eight 12 cm (4.7 in) guns manufactured by Škoda; Szigetvár and her sisters were the first major warships of the Austro-Hungarian fleet to be armed entirely with domestically produced guns. Unlike earlier Austro-Hungarian cruisers, the Zenta class discarded heavy belt armor in favor of a higher top speed.

Early in her career, Szigetvár embarked on a major overseas cruise to North America and northern Europe between October 1901 and October 1902. She thereafter served with the main fleet in home waters, where she typically took part in major training maneuvers every year. She also went on voyages to other country in the region, including frequent visits to the Ottoman Empire and Greece. In 1905, she was part of an international naval response to domestic unrest in the Ottoman Empire. The ship carried replacement crews to vessels stationed in East Asia, in 1907 and 1912. Szigetvár was in the Ottoman Empire when the heir to the Austro-Hungarian throne, Archduke Franz Ferdinand, was assassinated, prompting her recall during the July Crisis that led to the start of World War I.

Szigetvár was assigned to I Cruiser Division of the main Austro-Hungarian fleet for most of the war. She took part in bombardments of locations in Montenegro in the early months of the war. Following Italy's entry into the war in May 1915, the Austro-Hungarian fleet, including Szigetvár, sortied to shell targets in Italy, during which Szigetvár screened the fleet and attacked an Italian airship. She took part in further attacks on Italy later that year, including supporting air strikes in December and January 1916. She was reduced to a guard ship in Cattaro Bay in June 1917 before being withdrawn from service in March 1918. She was thereafter used as a barracks ship and a target for the Torpedo Warfare School. After the war, she was ceded to Britain as a war prize and was broken up in 1920.

Line-drawing of the Zenta class

In January 1895, the senior officers of the Austro-Hungarian Navy decided to build two types of modern cruisers: large armored cruisers of around 5,900 t (5,800 long tons) and smaller vessels of around 1,700 t (1,700 long tons). The latter were intended to screen the battleships of the main fleet, scouting for enemy vessels and protecting them from torpedo boat attacks. The chief constructor, Josef Kuchinka, prepared the initial design based on specifications that had been issued by the naval command, though by the time his design was finally approved in mid-1897, it had grown in size to around 2,300 t (2,300 long tons). Final approval came after work on the first unit, Zenta, had already begun.[1]

Szigetvár was 96 m (315 ft) long at the waterline and 97.88 m (321 ft 2 in) long overall; she had a beam of 11.93 m (39 ft 2 in) and a draft of 4.25 m (13 ft 11 in). The ship displaced 2,350 t (2,313 long tons) normally and 2,602 t (2,561 long tons) at full load.[2] The crew of the Zentas numbered 308 officers and enlisted men. Their propulsion system consisted of a pair of triple-expansion steam engines, each driving a screw propeller using steam provided by eight coal-fired Yarrow boilers.[3][4] Their engines were rated to produce 7,200 indicated horsepower (5,400 kW) for a top speed of 21 knots (39 km/h; 24 mph), although Szigetvár reached a speed of 20 knots (37 km/h; 23 mph) from at her designed horsepower during her sea trials. The ships carried enough coal to give them a range of 3,800 nautical miles (7,000 km; 4,400 mi) at 12 knots (22 km/h; 14 mph). To increase their range, the cruisers were fitted with a brigantine-sailing rig of 585.8 square meters (6,305 sq ft) on their two masts.[5]

The Zentas' main battery consisted of eight 40-caliber 12-centimeter (4.7 in) quick-firing guns manufactured by Škoda. One gun was mounted on the upper deck forward, six in casemates in the hull, and the remaining gun was placed on the upper deck aft. They also carried eight 44-caliber 47-millimeter (1.9 in) Škoda guns and two 33-caliber 47 mm Hotchkiss guns for defense against torpedo boats. These guns were all mounted individually, with four in the superstructure and the rest in casemates in the hull. The ships also carried a pair of 8 mm (0.31 in) Salvator-Dormus M1893 machine guns. Their armament was rounded out with a pair of 45 cm (17.7 in) torpedo tubes that were carried in the hull above the waterline.[3][5][6] The three Zenta-class cruisers were the first major Austro-Hungarian warships to carry an armament entirely manufactured by Škoda.[7]

The ships' armor deck consisted of two layers of 12.5 mm (0.49 in) steel over the bow and stern. Amidships, where it protected the propulsion machinery spaces, it doubled in thickness to a pair of 25 mm (0.98 in) layers. The casemates for the primary guns had 35 mm (1.4 in) thick sides and the conning tower received two layers of 25 mm plate on the sides.[3][6] Each of the 120 mm guns was protected by a 45-millimeter (1.8 in) gun shield, although they were not large enough to provide good cover for the gun crews.[5]

Service history

Notes

References

Related Articles

Wikiwand AI