SS Dakota

From Wikipedia, the free encyclopedia

NameDakota
NamesakeNorth Dakota
OwnerGreat Northern Steamship Company
RouteUnited States-Japan
A broadside image of the SS Dakota
History
United States
NameDakota
NamesakeNorth Dakota
OwnerGreat Northern Steamship Company
RouteUnited States-Japan
BuilderEastern Shipbuilding Company, Groton
Cost$7,803,404.00 (along with Minnesota)
Yard number2
Launched6 February 1904
Sponsored byMiss Mary B. Flemington
Completed22 March 1905
Maiden voyage28 April 1905
HomeportNew York
Identification
FateWrecked, 3 March 1907
NotesSister ship of SS Minnesota
General characteristics
TypePassenger Cargo Ship
Tonnage
Length622 ft 0 in (189.59 m)
Beam73 ft 5 in (22.38 m)
Depth41 ft 5 in (12.62 m)
Installed power2,565 Nhp[1]
Propulsion
Speed14.6 knots (27.0 km/h)
Capacity
  • 218 first-class passengers
  • 68 second-class passengers
  • 2,300 steerage passengers

Dakota was a steamship built by the Eastern Shipbuilding Company of Groton, Connecticut for the Great Northern Steamship Company owned by railroad magnate James J. Hill to enhance and promote trade between the United States and Japan.[2]

In 1904 the Great Northern Railway made an effort to facilitate trade with Asia, particularly with Japan and China, by entering into shipping business, and as a part of this endeavor two great steamers of approximately 20,000 GRT were ordered. Dakota was the second of these vessels, and was laid down at the Eastern Shipbuilding Company's yard at Groton, and launched on February 6, 1904 (yard number 2), with Miss Mary Bell Flemington of Ellendale being the sponsor. The ceremony was attended by nearly 5,000 people, including the governor of Connecticut Abiram Chamberlain, ex-governor Thomas Waller, James J. Hill, president of the Great Northern Steamship Company, many members of the board of trade from Minnesota and North and South Dakota, senators Hansborough and McCumber of North Dakota among others.[3][4] At the time, she and her sister-ship Minnesota were described as the largest ships ever built in America. The ship was of an awning-deck type, and was constructed using the most modern shipbuilding safety and protection ideas. She had a double-bottom through her entire length, and had her hull subdivided into numerous watertight bulkheads. The vessel was built with the view of North Pacific trade and had her hull strengthened, with some of her double plates being 2+12 inches (6.4 cm) thick. Additionally, the vessel had a newly patented gaseous fire extinguishing system installed throughout her holds. Each of her two engines had their own watertight compartments built around them, theoretically allowing the ship to continue sailing using only one of the engines, if the other one got flooded. She was also equipped with all the modern machinery for quick cargo loading and unloading and had 32 electric winches and a large number of derricks installed.[5] The steamer also had an experimental mechanical stoker system installed for testing purposes, and if it had proven to be successful, her sister-ship Minnesota would have been equipped with a similar system.

Main engines of the SS Dakota

In addition to the vast amount of cargo the ship could carry, Dakota had also accommodations constructed for 218 first-class, 68 second-class and approximately 2,300 steerage passengers.[6] The first class cabins were located in the large deck-house amidships which also featured a dining salon, being able to sit approximately 200 people, a library and a ladies boudoir. The bridge deck housed a smoking room and a cafe which was open 24 hours a day. To provide for such a large number of passengers, the vessel had a refrigerating plant installed, operating on the American-Linde system, capable of cooling 300 tons of provisions, and refrigerating 1,700 tons of produce.[5] The vessel was also equipped with four large evaporators in her engine room, capable of producing 30,000 gallons of fresh water per day to be used both by her boilers and passengers and crew.[5]

Dakota could have been easily converted to a troopship in case of need, and she would be able to transport approximately 1,300 troops in addition to all their equipment.

After successful completion of 24-hour-long sea trials held on March 23–24, 1905, during which the ship was able to maintain an average speed of 17.7 knots (20.4 mph; 32.8 km/h) over a continuous run of 59 miles, which she was able to complete in 3 hours and 20 minutes.[7] Following the sea trials the ship proceeded to Newport News and entered the drydock where some minor adjustments and painting were done.[6]

As built, the ship was 622 feet 0 inches (189.59 m) long (between perpendiculars) and 73 feet 5 inches (22.38 m) abeam, a depth of 41 feet 5 inches (12.62 m).[1] Dakota was originally assessed at 20,714 GRT and 13,306 NRT and had deadweight of approximately 19,000.[1] The vessel had a steel hull, and two triple-expansion steam engines of combined power of 2,565 nhp, with cylinders of 29-inch (74 cm), 51-inch (130 cm) and 89-inch (230 cm) diameter with a 57-inch (140 cm) stroke, that drove two screw propellers, and moved the ship at up to 15.0 knots (17.3 mph; 27.8 km/h).[1]

Operational history

References

Related Articles

Wikiwand AI