SS Lusitania (1871)

Lusitania was launched at the Laird John, Son & Co. shipyard in Birkenhead, England on 20 June 1871, and completed in September 1871 at a cost of £91,852. The ship was 115.8 metres (379 ft 11 in) long, had a beam of 12.6 metres (41 ft 4 in) and a depth of 10.7 metres (35 ft 1 in). She was assessed at 3,912 GRT and had a single 2 cylinder Compound expansion steam engine producing 700 rhp, driving a single screw propeller. The ship could reach a maximum speed of 12 knots (22 km/h; 14 mph) and possessed 3 schooner-rigged masts, one funnel and a clipper stem. As built, she had the capacity to carry 84 First class passengers, 100 Second class passengers and 270 Steerage passengers.^[1]

Lusitania was built for the Pacific Steam Navigation Company and was assigned to sail the United Kingdom - South America route. She conducted her maiden voyage on 13 October 1871 from Liverpool to Valparaíso via Cape Horn without incident. However, on her return trip to the United Kingdom, Lusitania lost three of her four propeller blades shortly after leaving Valparaiso. As no dry-dock was available to repare the ship, a wooden caisson (which measured 7.31 metres (24 ft 0 in) by 7.92 metres (26 ft 0 in)) was built around her stern and subsequently pumped dry. The spare screw was fitted onto Lusitania within two weeks of the incident. The ship continued on her route until she was laid up alongside four other vessels in 1874, as the Pacific Steam Navigation Company reduced their service to South America from once a week to twice a month.^[2]

The next chapter in the career of Lusitania occurred in February 1877, when she was chartered by the Orient Steam Navigation Company. Her first voyage under her new owner occurred on 26 June 1877, when she departed Gravesend, England for Melbourne, Australia, sailing via Plymouth and the Cape of Good Hope. Lusitania arrived at her destination on 8 August without incident and made her return voyage to the United Kingdom via the Suez Canal. Australian painter Tom Roberts, made a painting during his voyage on board Lusitania back to Australia in March 1885. The painting depicts a deck scene on board the ship and was named coming south. The work now lies in the National Gallery of Victoria and was featured on a $10 Australian stamp in 1977.^[2]

On 17 April 1885, Lusitania was commissioned as an Armed Merchant Cruiser for half a year in Sydney due to the Russian war scare. The ship's fitting out and restoration had cost about £35,505, before she was disarmed and returned to her owners in 1886. Upon her return, she underwent a refit, that saw her 2 cylinder Compound expansion steam engine replaced by a triple expansion steam engine which increased her maximum speed from 12 knots (22 km/h; 14 mph) to 15 knots (28 km/h; 17 mph). Her yards were also removed and her passenger accommodations rebuild, reducing her capacity to carry First class passengers from 84 to 70 and her Second class passengers from 100 to 80.^[2]

In the early 1890s, Lusitania was sailing the London - Sydney route with stops in Gibraltar, Naples, Port Said, Suez, Colombo, Albany and Melbourne. She maintained this schedule until she was replaced by the newly built SS Ortona in 1900. That same year on 31 March, Lusitania was sold to Elder Dempster Lines Ltd. serving the Liverpool - Halifax route. The ship was reverted to the Pacific Steam Navigation Company in July 1900, following the sinking of SS Talca, before being returned to Elder Dempster Lines Ltd. in February 1901. At the end of her career, Lusitania was chartered by the Allan Line.^[2]