Santa Claus (steamboat)

From Wikipedia, the free encyclopedia

NameSanta Claus
NamesakeSanta Claus
Owner
Operator
  • New Steamboat Co. (1845)
  • People's Line (1846)
  • Unknown (1847)
  • People's Line (1848)
  • Unknown (1849–1851)
  • Independent Line (1852)
  • Cornell Steamboat Co. (1853–1901)
Santa Claus
The former Santa Claus after removal of her passenger accommodations and conversion to the towboat A. B. Valentine
History
NameSanta Claus
NamesakeSanta Claus
Owner
Operator
  • New Steamboat Co. (1845)
  • People's Line (1846)
  • Unknown (1847)
  • People's Line (1848)
  • Unknown (1849–1851)
  • Independent Line (1852)
  • Cornell Steamboat Co. (1853–1901)
BuilderW. & T. Collyer (New York, NY)
LaunchedApril 16, 1845
CompletedJuly 1845
Maiden voyageJuly 19, 1845
In service1845–1901
RenamedA. B. Valentine (1869)
Refit
  • Converted to towboat, 1856
  • Major refit 1869
IdentificationOfficial No. 23689[1]
FateScrapped at Perth Amboy, 1901
General characteristics
TypeSidewheel steamboat
Tonnage
Length
  • 1845: 181 ft 5 in (55.30 m)
  • 1847: 209 ft (64 m)
Beam24 ft 3 in (7.39 m) over hull
Depth8 ft 4 in (2.54 m)
Installed power
PropulsionSidewheels

Santa Claus was a sidewheel passenger-and-freight steamboat built in 1845 for service on the Hudson River between Wilbur, New York, (part of modern-day Kingston) and New York City. In her first few years of operation, Santa Claus saw service on a number of different Hudson River routes, most notably between Albany and New York City. She was also employed from time to time as an excursion steamer. A highlight of her career occurred in 1852, when she had the honor of conveying the remains of American statesman Henry Clay from New York City to Albany en route to their final resting place.

In 1853, after her original owners had struggled for some years to find Santa Claus a regular route, she was sold to the Cornell Steamboat Company, which placed her in passenger service between Rondout, New York, and New York City. This strategy proved successful enough that after only two years, she was replaced by a larger steamer to address the growing demand. Santa Claus was then converted into a towboat, in which capacity she would continue to serve the Cornell company on the Hudson River to the end of her career.

In 1869, Santa Claus was rebuilt and returned to service under the name A. B. Valentine. She continued to operate as a towboat between Rondout and the city until 1887, when she was transferred to the less demanding Rondout to Albany route. A. B. Valentine was broken up at Perth Amboy, New Jersey, in 1901 after a 56-year career.

Ezra Fitch, a relative of steamboat pioneer John Fitch, was a businessman from Wilbur, New York, (part of modern-day Kingston) who owned a number of canal boats and Hudson River sloops. In February 1845, his firm, E. Fitch & Company, announced its first venture into steam navigation with the proposed establishment of a regular steam service between Wilbur and New York City.[2] Fitch contracted with a New York shipbuilding firm, W. & T. Collyer, for construction of a steamboat for the service,[2] which vessel was launched on April 16.[3] Fitch had initially intended to name the steamer St. Nicholas, but when another company's steamer was so named, he decided—after briefly flirting with the alternative spelling Santa Klaas—to name his new vessel Santa Claus.[2]

Santa Claus was a wooden-hulled sidewheeler with a length of 181 feet 5 inches (55.30 m), beam of 24 feet 3 inches (7.39 m),[a] hold depth of 8 feet 4 inches (2.54 m) and gross register tonnage of 385.[1] Her passenger accommodations included separate cabins for male and female passengers—a common arrangement for steamboats of the day—while 12 staterooms, including two doubles, were installed on the second or promenade deck. The steamer also had freight capacity, and the main deck forward was reserved for carrying livestock.[2]

Santa Claus's boilers were originally built for the larger steamboat Rip Van Winkle (pictured)

Santa Claus was powered by a single-cylinder vertical beam steam engine with bore of 42 inches (110 cm) and stroke of 10 feet (3.0 m), built by the West Street Foundry of Brooklyn, New York.[5] According to a newspaper notice placed by the steamer's owners, her two[1] boilers were originally built for the steamboat Rip Van Winkle, but proving too small for that vessel, were acquired by the company and installed in Santa Claus instead.[b] Santa Claus's speed is not known, but according to contemporaneous reports, she was a fast boat.[c]

The steamer's decorations were in conformity with her name. On one paddle box was a painting of Santa Claus climbing down the chimney of an old Dutch-style house with a bag of toys over his shoulder, while his reindeer and sleigh stood nearby; on the other, he was portrayed inside the house, about to ascend the chimney after having filled the Christmas stockings.[10] The steamboat's figurehead was a carving of Santa, while in the saloon a large painting, once again depicting Santa about to descend a chimney, was featured. Only atop the pilothouse was there a deviation from the overall theme, in the form of a statue of Cupid with bow and arrow. The paddle box and saloon paintings were done by John Vanderlyn Jr., a nephew of renowned Kingston artist John Vanderlyn.[5] Writing in the 1980s, marine historian Donald C. Ringwald had the following to say about the steamer's idiosyncratic theme:

Probably there never was such a holiday boat. In this day and age, money-minded merchants are criticized for diluting Christmas over many weeks. But here was a case when it was spread over the entire year.[5]

In spite of her thematic association with the festive season, Santa Claus, like other Hudson River steamers, was typically unable to operate over the Christmas – New Year period due to the presence of river ice.[d]

Service history

Footnotes

References

Related Articles

Wikiwand AI