St. Margaret's Bay Hydroelectric System

From Wikipedia, the free encyclopedia

CountryCanada
Coordinates44°41′29″N 63°53′30″W / 44.69145°N 63.8917°W / 44.69145; -63.8917
PurposePower
St. Margaret's Bay Hydroelectric System
Mill Lake Hydro Plant
St. Margaret's Bay Hydroelectric System is located in Nova Scotia
St. Margaret's Bay Hydroelectric System
Location of second of two power stations
St. Margaret's Bay Hydroelectric System is located in Canada
St. Margaret's Bay Hydroelectric System
St. Margaret's Bay Hydroelectric System (Canada)
CountryCanada
LocationHalifax Regional Municipality, Nova Scotia
Coordinates44°41′29″N 63°53′30″W / 44.69145°N 63.8917°W / 44.69145; -63.8917
PurposePower
StatusOperational
Construction beganMay 1920
Construction cost$1,700,000[1]
Built byD.G. Loomis & Sons[1]
Designed byC.H. & P.H. Mitchell, of Toronto
Owner(s)Emera
Operator(s)Nova Scotia Power
Upper reservoir
CreatesMill Lake & Sandy Lake
Total capacity101,145,000 m3 (82,000 acre⋅ft)[2]
Active capacity89,180,700 m3 (72,300 acre⋅ft)[2]
Catchment area271 square kilometres (105 sq mi)[3]
Normal elevationMill Lake 77.4 m (253.9 ft), Sandy Lake 66 m (216.5 ft)
Lower reservoir
CreatesMill Lake Head Pond
Normal elevation27.9 m (91.5 ft)
Mill Lake, Sandy Lake & Tidewater Plants
Coordinates44°41′29″N 63°53′29″E / 44.691384°N 63.891380°E / 44.691384; 63.891380
Commission date8 June 1922
TypeConventional
Hydraulic headMill Lake 50 m (164.04 ft), Sandy Lake 38 m (124.67 ft), Tidewater 27.9 m (91.54 ft)[2]
Turbines2 x 6 MW + 2 x 2.9 MW[4]
Installed capacity10.2 MW[3]
Annual generation30 GWh[4]
Website
www.nspower.ca

The St. Margaret's Bay Hydroelectric System consists of three hydroelectric power plants (two collocated in the same building) and the related lake, dam, and river systems driving them. The system is situated within both Lunenburg County and the Halifax Regional Municipality, beginning approximately 2.5 km (1.6 mi) east of the Head of Saint Margarets Bay and approximately 10 km (6.2 mi) southwest of Hammonds Plains. The system is part of the East Indian River watershed and drains 271 square kilometres (105 sq mi), with water storage provided in Lunenburg County by Mill Lake, Coon Pond, Sandy Lake, Wrights Lake, Big Indian Lake, Five Mile Lake and, at times, an overflow from Pockwock Lake in the Halifax Regional Municipality. The system is owned and operated by Nova Scotia Power Inc.

System assets associated with the St. Margaret's Bay Hydro System, which represents six generating units with an operating capacity of 10.2 MW, include Beeswanger Dam, Five Mile Dam and Wing Dam 4, Mack Lake Main Dam, Five Mile Wing Dams 1,2 and 3, Big Indian Dam, Wright's Lake Dam, Coon Pond Dam, Sandy Lake Dam, Sandy Lake and Coon Pond Pipeline, Mill Lake Plant and Surge Tank, Little Indian Crossover, Mill Lake Dam, Tidewater Plant and Surge Tank, Tidewater Pipeline, as well as associated headponds. Outflow is into St. Margarets Bay, Nova Scotia between Head of St. Margarets Bay and Tantallon.

Commissioned 8 June 1922, St. Margaret's Bay Hydroelectric System is the oldest hydro plant in Nova Scotia.

Dams, Wing Dams, Spillways, and Canals

There are 19 dams and wing dams of various heights, lengths and construction types holding back the lakes and reservoirs that make up the St. Margaret's Bay Hydroelectric System:[3]

Dam or other Structure[3]Height (ft.)[3]Length (ft.)[3]Foundation[3]Type[3]
Coon Pond Dam and Spillway32408Constructed on bedrockConcrete & Earthfill
Sandy Lake Dam and Spillway50.51,021Constructed on bedrockConcrete & Earthfill
Big Indian Spillway25.1430Constructed on bedrockConcrete
Big Indian Main Dam (Concrete)37.9470Constructed on bedrockConcrete
Big Indian Main Dam (Earthfill)33.3120Constructed on bedrockConcrete & Earthfill
Big Indian Wing Dam No. 1475
Big Indian Wing Dam No. 22.585
Five Mile Lake Main Dam14.5695Constructed on bedrockConcrete
Mack Lake Dam20410Earthfill
Five Mile Lake Wing Dam No. 16200Freeboard damEarthfill
Five Mile Lake Wing Dam No. 24165Freeboard damEarthfill
Five Mile Lake Wing Dam No. 34105Freeboard damEarthfill
Five Mile Lake Wing Dam No. 410500Freeboard damConcrete
Beeswanger Dam8460Freeboard damEarthfill
Wrights Lake Dam and spillway17326Concrete & Earthfill
Wrights Lake Wing Dam No. 1420
Wrights Lake Wing Dam No. 23.520
Wrights Lake Wing Dam No. 3535
Little Indian Lake Cross-over Control Structure4170Constructed on bedrockConcrete & Earthfill
Mill Lake Head Pond Dam (Tidewater Plant)20830Constructed on bedrockConcrete & Earthfill

Water for the system comes from Five Mile Lake, Big Indian Lake, Sandy Lake, Wrights Lake, Coon Pond, Mill Lake and, at times, overflow from Pockwock Lake. The two principal storage areas for the Sandy Lake Development are Five Mile Lake and Big Indian Lake.

On the Eastern side of the system, drainage into Wright's Lake and Coon Pond, in addition to surplus water from Pockwock Lake (owned by Halifax Regional Municipality), supplies the Mill Lake Plant. The new Coon Pond Dam has water continually flowing out from a maintenance chute to ensure water is always feeding a stream leading to St. Margaret's Bay to maintain fish habitat in the stream.

Output water from the Sandy Lake and Mill Lake plants then flow into the Mill Lake Head Pond to supply the Tidewater Plant which outputs at sea level into St. Margaret's Bay.

The total elevation from the highest reservoir to sea level is 134.2 m (440 ft).[4] The St. Margaret's Bay Hydroelectric System has an annual output of 30 Gigawatt hours of electricity from two .6 MW generators at Mill Lake and two 2.9 MW generators at the Tidewater plant.[4]

The Generators were made by General Electric Co limited from Peterborough, Toronto, Ontario, Canada.

Mill Lake Generating Station

Located on the Northeast River. Two vertical francis turbine units, shaft direct connected to the generators, with individual direct connected exciters, 49.5 m (162.4 ft) static head, 514 rpm, 1.42 MW (1,904 hp), for a total of 3.73 MW (5,000 hp). Two generators, 1,600 kVA each, 13,200 volts, 3 phase, 60 Hz. The original penstocks were built out of wood, using tongue & groove staves held together with metal bands (the same technology used in wood barrels), 1.82 m (6 ft) diameter, 965.6 m (3,168 ft) long, later replaced in part with fibreglass penstocks.[2] More recently (2010) the penstocks from Coon Pond to the Mill Lake Station were replaced with black polypropylene, buried underground.

Sandy Lake Generating Station

Sandy Lake Generating Station was added to the system in 1927. The power house was built beside the Mill Lake Plant.[1] Two vertical francis turbine units, shaft direct connected to the generators, with motor generator set excitation, 38.1 m (125.0 ft) static head, 514 rpm, 1.86 MW (2,494 hp), for a total of 2.84 MW (3,810 hp). Two generators, 2,000 kVA each, 13,200 volts, 3 phase, 60 Hz.[2] The original Penstocks were built out of wood tongue & groove staves with metal bands, 2.43 m (8 ft) diameter, 1,756.5 m (5,763 ft) long, later replaced in part with fibreglass penstocks.

Tidewater Generating Station

Located on the shores of St. Margaret's Bay. Two vertical francis turbine units, shaft direct connected to the generators, with individual direct connected exciters, 27.9 m (91.5 ft) static head, 300 rpm, 2.57 MW (3,446 hp), for a total of 5.14 MW (6,890 hp). Two generators, 3,900 kVA each, 13,200 volts, 3 phase, 60 Hz.[2] The original Penstocks were built out of wood tongue & groove staves with metal bands, 3 m (10 ft) diameter, 909.2 m (2,983 ft) long, later replaced in part with fibreglass penstocks.

2012 Upgrade

The system was upgraded in 2012 with $17.8 million of work to replace the old wooden penstocks in fibreglass, a new water surge tank, a new dam at Mill Lake, a new gatehouse and gate at Mill Lake, and new floating booms to keep debris away from the dams.

2016 Surge Tank replacement

The original 43.9 m (144 ft) tall Sandy Lake Surge Tank was installed in 1927, and refurbished in 1996. In 2016 it was replaced with a new Surge Tank made of steel and fiberglass.[5]

Restoration of Fish Habitat

References

Related Articles

Wikiwand AI