Tanjung Priok Dock of 4,000 tons
From Wikipedia, the free encyclopedia
Tanjung Priok Dock of 4,000 tons lifting the barque John Davie | |
| History | |
|---|---|
| Name | Tanjung Priok Dock of 4,000 Tons |
| Builder | Pletterij voorheen L.J. Enthoven & Co |
| Commissioned | 7 October 1896[1] |
| Out of service | February 1942 |
| Stricken | 9 December 1947 |
| Homeport | Tanjung Priok |
| General characteristics (as completed) | |
| Length | 98.5 m (323 ft 2 in)[2] |
| Beam | 28 m (91 ft 10 in)[2] |
| Depth of hold | 3.75 m (12 ft 4 in)[2] |
Tanjung Priok Dock of 4,000 Tons, was a floating dry dock built for Droogdok-Maatschappij Tandjong Priok (dry dock company Tanjung Priok) in the 1890s.
No harbor in Batavia / Jakarta
The Indonesian capital Jakarta is on the shore of the Java Sea. One therefore expects it to be a port city. This was not the case for most of its history. The East India Men of the VOC and later ships could anchor before Batavia, but any cargo had to be transloaded on smaller ships in order to reach the city. Any repairs had to be done at Onrust Island, where ships could reach the shore, and could careen.
The establishment of Tanjung Priok
During the nineteenth century Singapore and its excellent harbor and facilities succeeded in attracting much of the trade in and with the Dutch East Indies. The Dutch government wanted to centralize the trade within the colony on Dutch ports. The same applied to the trade between the Netherlands and the Dutch East Indies. Without a proper port this could not be done, because the transloading made trading at Batavia more expensive than trading at other established ports.
In 1877 the Dutch government started construction of a harbor for Batavia at Tanjung Priok (Dutch: Tandjong Priok). This harbor lacked a good repair facility. It had only the small Volharding Dock of the Nederlandsch Indische Droogdok Maatschappij (NIDM) at nearby Amsterdam Island, which was too small for most modern ships. NIDM would try to get concession for the exploitation of dry docks at Tanjung Priok, but would not get it.
Droogdok Maatschappij Tandjong Priok
In June 1890 the Dutch government made a contract with David Croll to create a repair shipyard and docking facility at Tanjung Priok. Part of the deal was that Croll would lease Onrust Dock of 3,000 tons for 6% of its book value. He would also lease the cylinder dock free of charge. A new dry dock of 4,000 tons, i.e. Tanjung Priok Dock of 4,000 Tons would be built in the Netherlands, and when finished would be leased instead of the 3,000 tons dock. By law of 12 November 1890 this agreement was approved.[3] It would lead to the establishment of the Droogdok Maatschappij Tandjong Priok (dry dock company Tanjung Priok).
The three dry docks of the company
The Droogdok Maatschappij Tandjong Priok did not want to buy its own dry dock. In view of the disasters that happened to the Batavia Dock of the NIDM, and the Cores de Vries Dry Dock, this is not strange. The Dutch government found an expedient by leasing Onrust Dock of 3,000 tons to the company. This dry dock could lift most ships, and would be used by the company from 1891 to 1896. The company also got the so-called cylinder dock on lease. This was a small dock that could lift about 600 tons, which would have had to be held available for government ships for a number of days each year.
Tanjung Priok Dock of 4,000 Tons would replace Onrust Dock of 3,000 tons. The net effect of this contract would be that a third iron dry dock would appear in the Dutch East Indies. To make this possible, the Dutch government would effectively shield investors from the risk of construction and assembly. Even if private enterprise would build and assemble the dock, the government could ensure that this was done properly. Even so, the contract is puzzling. Why not simply lease out, or even sell, Onrust Dock of 3,000 tons to a private company and build a new 4,000 tons dry dock for the government? A logical explanation for the complexity is in the result. The contract would result in docking facilities for most of the heavy units (Evertsen-class coastal defence ships, Atjeh-class cruisers) of the Dutch Navy in both Batavia and Surabaya. Permanently handing over Onrust Dock of 3,000 tons would result in two heavy docks in Surabaya, which would rarely be needed at the same time.
Ordering and construction
Ordering
The contract between the state and David Croll specified that the dry dock would be constructed in the Netherlands, and assembled in the Dutch East Indies.[3] On 29 August 1890 a tender gave the order to Pletterij voorheen L.J. Enthoven & Co for 718,803 guilders. There were five other offers, the highest for 927,000 guilders.[4] The required 4,000 tons of iron would be delivered by Wed. A. Brand & Zoon in Dordrecht.[5]
Construction
In September 1893 the Droogdok Maatschappij Tandjong Priok expected that Tanjung Priok Dock of 4,000 Tons would be ready for transport somewhere in 1894.[6] On 29 March 1893 the queens Wilhelmina and Emma visited the Pletterij, where they were welcomed by CEO H. Enthoven. The work was expected to be ready in a few weeks, even though the contract only demanded delivery in July 1894.[7] One expected to start shipping the dock in July 1894. In October 1894 the dock was reported to be on her way to the Dutch East Indies.[8] While these first shipments took place workers were still busy disassembling the dock in December 1894, when one of them fell from the dock and died.[9]
Assembly at Tanjung Priok
In October 1894 it was known that the dry dock would be assembled in Tanjung Priok by the Droogdok Maatschappij Tandjong Priok. Assembly would cost 385,000 guilders and be finished in two years.[8] The company would make a substantial profit on this assignment.[1] The government then brought 200,000 guilders on the 1895 Dutch East Indies budget for the assembly.[10] In late March 1895 the last parts of the dock were sent to Tanjung Priok, and by then assembly had started.[11] Assembly was done by riveting the nine parts of the dock, and launching them separately from a slipway.[2]
The final cost for assembling the dock would be 230,000 guilders in 1895. For 1896 163,000 guilders would be requested.[12] By June 1896 Tanjung Priok Dock of 4,000 Tons was almost ready, but the dock pit where she would be stationed was not, and so commissioning would be delayed for a few more months.[13] When all was ready, a trial was held on 7 October 1896, when she lifted HNLMS Tromp.[14][2]
Characteristics
The size of Tanjung Priok Dock of 4,000 Tons was originally stipulated to be 4,000 tons. The contract determined that it would be self-docking. This meant that it would be built in sections that could lift each other.[3] This would eliminate the need for the very costly operation of towing a dry dock to the dock pit in Surabaya and repairing her there. The dry dock would be constructed so that it could be expanded to a lift capacity of 5,000 tons, in case developments in international shipping would create the need for a bigger dock.[3] Coincidentally, a 4,000 tons dock could lift almost all ships of the Dutch navy, especially the 6 unprotected cruisers of the Atjeh class that formed the backbone of the Dutch navy in the East Indies.
The dock consisted of 9 'pontoons' that were connected with 0.5 distance between them. They were each 10.5 m (34 ft 5 in) long and 28 m (91 ft 10 in) wide. On the side the hold was 3.35 m (11 ft 0 in) in the center it was 3.75 m (12 ft 4 in). Combined these gave a length of (9 * 10.5 = 94.5) + (8 * 0.5) = 98.5 m. The sides were 8.5 m (27 ft 11 in) high, 3.5 m (11 ft 6 in) wide at the bottom and 6 m (19 ft 8 in) wide on the top. The sides held the centrifugal pumps and the tubes that emptied the pontoons. They also held the small machines and tools that were used when a ship was in dock.[2]
