WT-4

Polish telephone plug From Wikipedia, the free encyclopedia

WT-4[1] (adopted as ВТ-4[2] in the USSR[3]) is a Polish telephone plug used to connect telephone sets to the network. Introduced in the second half of the 20th century and adopted in several Eastern Bloc countries as a standard[citation needed]. It has since been replaced by the RJ-11 standard. Sockets are labelled with the text GTN-4[4] (РТШ-4 in the USSR[3]).

A photograph of a WT-4 plug with four metal prongs and a plastic pin protruding from the top, and an RJ-11 socket on the side. The metal prongs are labelled with the letter A, while the RJ-11 socket is labelled with the letter B.
A WT-4 plug (A) with an RJ-11 adapter (B)
A photograph of a plastic GTN-6 socket (with seven holes) and GTN-4 socket (with five holes) side-by-side.
GTN-6 (left) and GTN-4 (right) sockets produced by Telos-Kraków.

WT-4 plugs consist of 4 metal pins with an additional plastic pin at the bottom to prevent inserting the plug the wrong way round. When the plug is inserted into a socket, the plastic pin also disconnects a 1μF capacitor built into the socket. When connected, the capacitor simulates a telephone set with the handset hung up. This allows for the testing of the line even when the subscriber doesn't have a telephone connected to the network. In the mid-1990s, installations of WT-4 plugs began to be phased out, and the standardized shape of the socket was used to install RJ-11 connectors instead.

A GTN-6 plug disassembled into two parts, the plastic cover on the left and the internal electronics on the right. Above the terminal block is visible a blue capacitor.
The inside of a GTN-6 plug. Visible above the contacts is the 1μF capacitor.

A rare 6-pin version also existed, called WT-6.[5] Extra pins (numbered with the missing 1 and 2) were located between the existing pins 3 and 5, and 4 and 6, respectively. These extra pins were used for powering telephone sets with illuminated rotary dials, as well as some more advanced telephone installations.

More information Socket, Socket with capacitor ...
Sockets and plugs according to Polish BN-90/3213-22[6] and Soviet GOST 8810-81 standards[3]
Socket Socket with capacitor Plug Number of pins
BN GOST BN GOST BN GOST
GTN-4 РТШ-4 (RTSh-4) GTN-4c РТШК-4 (RTShK-4) WT-4 ВТ-4 (VT-4) 4
GTN-6 РТШ-6 (RTSh-6) GTN-6с РТШК-6 (RTShK-6) WT-6 ВТ-6 (VT-6) 6
Close
More information Function, notes, Pin number in GTN (RTSh) socket ...
Socket pin-out
Function, notes Pin number in

GTN[4] (RTSh[3]) socket

 Function, notes
Ground. Used in sets with grounding buttons when working with internal telephone exchanges 6 (1)
5 (а[2]) Telephone line B, in GTN-4c connected with capacitor
GTN-6 advanced features. Not present in GTN-4 2 (3) 1 (4) GTN-6 advanced features. Not present in GTN-4
In a plug bridged with pin 5 (а). Used to connect an additional bell when phone plug is connected 4 (2) 3 (б, b) Telephone line A
In GTN-4c connected with capacitor 8 (5) Socket switch pins, disconnected on plug insertion 7 (6) Permanently connected with pin 3 (б) in socket
Close

See also

References

Notes

Related Articles

Wikiwand AI