Chevrolet Brookwood
From Wikipedia, the free encyclopedia
| Chevrolet Brookwood | |
|---|---|
 1960 Chevrolet Brookwood | |
| Overview | |
| Manufacturer | Chevrolet (General Motors) |
| Production | 1958–1961 1969–1972 |
| Body and chassis | |
| Class | Full-size |
| Layout | FR layout |
The Chevrolet Brookwood is a series of full-size station wagons produced by Chevrolet from 1958 to 1961, and again from 1969 to 1972. It debuted in 1958 as Chevrolet's mid-range model in its station wagon lineup, positioned between the less expensive Yeoman and more luxurious Nomad station wagons. After the Yeoman was discontinued in 1959, the Brookwood was subsequently demoted to entry-level status, before going out of production altogether in 1961. It made a brief reappearance from 1969 and 1972, once again as the least-expensive wagon in Chevrolet's lineup.
Design
| First generation | |
|---|---|
 1958 Chevrolet Brookwood | |
| Overview | |
| Model years | 1958 |
| Assembly |
|
| Designer | Clare MacKichan |
| Body and chassis | |
| Body style | 4-door station wagon |
| Platform | GM B platform |
| Related | |
| Powertrain | |
| Engine |
|
| Transmission |
|
| Dimensions | |
| Wheelbase | 117.5 in (2,984 mm) |
| Curb weight |
|
| Chronology | |
| Predecessor |
|
| Successor |
|
Introduced in 1958 as Chevrolet's mid-priced station wagon, Brookwoods were trimmed in line with Chevrolet's mid-priced Chevrolet Biscayne models. The Brookwood offered for the 1958 model year was a 4-door station wagon, available in either six- or nine-passenger models.
.jpg)
For 1958, Chevrolet models were redesigned longer, lower, and heavier than their 1957 predecessors. The first ever production Chevrolet big block V8, the 348 cu in (5,700 cc), was now an option. Chevrolet's design for the year fared better than its other GM offerings, and lacked the overabundance of chrome found on Pontiacs, Oldsmobiles, Buicks and Cadillacs. Complementing Chevrolet's front design was a broad grille and quad headlights that helped simulate a 'Baby Cadillac'; the wagon's tail received a fan-shaped alcove on both side panels, similar to the sedan's, but wagon's housed single tail lights instead of dual (triple on Impala) to accommodate the tailgate. Despite being a recession year, consumers made Chevrolet the No. 1 make of automobile (beating Ford, which held the title in 1957) and the Bel Air was at the core of Chevrolet's popularity. The Nomad station wagon name also reappeared in 1958 when the vehicle bowed as the premium four-door Chevrolet station wagon, lacking the unique styling of the 1955-57 Nomads. A new dash was used.[2] The value of a drag coefficient for 1958 Chevy wagons is estimated by a-c, is Cd = 0.6.[3]
As Chevrolet's mid-range wagon
For its first year, Chevrolet's 6 and 9-passenger Brookwood wagons replaced 1957 Chevrolet 210 Townsman 6-passenger 4-door wagon and 1957 Chevrolet 210 Beauville 9-passenger 4-door wagon as their mid-range station wagon model between their plainer 1958 only Yeoman and the now 4-door only top-of-the-line Nomad. Like the 1958 Nomad, the 1958 Brookwood was also 4-door only. The next year Brookwood would become the base model wagon and offer a 2-door effectively replacing Yeoman. Buyers could order any engine and transmission choice, including the 348 V8 and the fuel-injected 283 V8 engines.
Safety
Like the rest of Chevrolet's 1958 full size car line-up, the Brookwood featured Chevrolet's new "Safety-Girder" cruciform frame. Similar in layout to the frame adopted for the 1957 Cadillac, it featured box-section side rails and a boxed front cross member that bowed under the engine. These "X-frames" were used on other 1958 to 1964 Chevys, as well as some Cadillacs. The rear was tied together by a channel-section cross member.[4] This design was later criticized as providing less protection in the event of a side impact collision, but it persevered until 1965.[5]
Second generation (1959–1960)
.JPG)
| Second generation | |
|---|---|
.jpg) 1960 Chevrolet Brookwood | |
| Overview | |
| Model years | 1959–1960 |
| Assembly |
|
| Body and chassis | |
| Body style | |
| Layout | FR layout |
| Platform | GM B platform |
| Related | |
| Dimensions | |
| Wheelbase | 119.0 in (3,023 mm) |
| Chronology | |
| Predecessor | Chevrolet Yeoman |
For the second time in as many years, Chevrolet again came up with a totally new car. From the front or rear the 1959 Chevrolets resembled nothing else on the road. From the headlights, placed as low as the law would allow, to the cats-eye tail lights, the 1959 Chevrolet was a brand new car with all new sheet metal. The most visual new change was the flat, wing shaped tailfins.[6] The car was built on a 119 in (3,023 mm) wheelbase and was 211 in (5,359 mm) long, which was 11 in (279 mm) longer than the 1957 model. This made Chevrolet the longest car in the low-priced range, whereas two years before it had been the shortest. In addition, the car was 3 in (76 mm) wider outside and had 5 in (127 mm) more width inside than it did in 1958, through the reduction of door thickness. The GM X frame had no side rails.[7]
Wagons were still classed by themselves, but had model numbers matching the car series. Chevrolet eliminated its entry-level Delray-based Yeoman models and the Biscayne-based Brookwood became Chevrolet's least expensive wagon models. Brookwoods were now available in two-door or four-door body styles, both in six-passenger configuration only. The new Parkwood 6-passenger and new Kingswood 9-passenger wagons had Bel Air's model number, and as such were the middle range wagons. A variety of speed options, such as fuel injection, special cams and higher compression, gave horsepower ratings up to 315. The Nomad was still the top Chevy wagon. A parking brake warning light was optional. Under the hood, little change took place for '59 Chevys.[8]
Few alterations were made for 1960. The new models were refinements of the 1959 style with a much more restrained front end, the return of the double cone tail lights of 1958 rather than the "cat's eyes" of 1959. Under the hood, things remained constant. Fuel injection was no longer available, but with the 348 cubic inch engine, a horsepower rating of 335 at 5800 rpm was now achieved. This involved the use of three double-barrel carburettors, a special cam and an 11.25:1 compression ratio, all sold as a package.
2-door variant
Like the 1958 Yeoman 2-door. The 1959 & '60 Brookwood 2-doors, are preferred by hotrodders and collectors over their 4-door counterparts. The two-door variant would become the basis for the new-for-1959 El Camino. Unlike the Brookwood, the El Camino could be ordered in trim levels corresponding to the entire full-sized car line including the Impala. 1960 marked the end of Chevrolet's full size 2-door wagons, and the end of 2-door Chevrolet wagons all together until the 1964 Chevelle 300 2-door wagon.[9]
.jpg)
Safety
Chevrolet's 1959 & '60 Brookwood (as well as the rest of Chevy's full size line up) still featured Chevrolet's "Safety-Girder" cruciform frame introduced in '58. Similar in layout to the frame adopted for the 1957 Cadillac, it featured box-section side rails and a boxed front cross member that bowed under the engine. These "X-frames" were used on other 1958 to 1964 Chevys, as well as some Cadillacs. The rear was tied together by a channel-section cross member.[4] This design was later criticized as providing less protection in the event of a side impact collision, but it persevered until 1965.[5]
.jpg)
