Buxhall Windmill

From Wikipedia, the free encyclopedia

Mill nameBuxhall mill
Coordinates52°10′55″N 0°55′08″E / 52.1819°N 0.9189°E / 52.1819; 0.9189
Operator(s)Clover family
Buxhall Smock Mill
Origin
Mill nameBuxhall mill
Grid referenceTL 996 577
Coordinates52°10′55″N 0°55′08″E / 52.1819°N 0.9189°E / 52.1819; 0.9189
Operator(s)Clover family
Year built1815
Information
PurposeCorn mill
TypeSmock mill
Base storeysThree-storey base
Smock sidesEight-sided smock
No. of sailsFour sails
Year lostDemolished 1860
Buxhall Tower Mill
The converted mill
Origin
Mill nameBuxhall Mill
Grid referenceTL 996 577
Operator(s)Private
Year built1860
Information
PurposeCorn mill
TypeTower mill
StoreysThree storeys
Base storeysThree-storey base
No. of sailsFour Sails
Type of sailsPatent sails
WindshaftCast iron
WindingFantail
Auxiliary powerOil engine
No. of pairs of millstonesFive pairs
Other informationBuilt on base of previous smock mill

Buxhall Mill is a tower mill at Buxhall, Suffolk, England which has been converted to residential accommodation.

Description

Tower

The tower of Buxhall Mill is three storeys, built on a three-storey base of a smock mill. It is 17 feet 8 inches (5.38 m) diameter at curb level. There was a stage at second-floor level.[3]

Cap, sails and fantail

Buxhall Mill had a domed cap with a gallery.[3] It was 17 feet 6 inches (5.33 m) diameter and 14 feet (4.27 m) high internally.[1] The four patent sails had eleven bays of three shutters, and spanned 80 feet (24.38 m).[1] They were carried on stocks of 55 feet (16.76 m) long, 13 inches (330 mm) square at the poll end. The sails were 33 feet 6 inches (10.21 m) long and 8 feet 6 inches (2.59 m) long. They were fitted with Catchpole's Air Brakes. These provided extra power in light winds, but acted as an effective air brake in strong winds. The windshaft weighed 38 cwt (1,930 kg) and cost £38. 0. 0. new in 1860. The cap was winded by an eight bladed fantail.[3] An unusual feature of this mill was the cast iron gutter around the curb, which collected rainwater from the cap and delivered it to the ground via a downpipe on the outside of the mill.[1]

Machinery

The mill drove four pairs of millstones, a fifth pair being described as "of small size".[4] The upright shaft was in two sections. It carried a 6 feet 2 inches (1.88 m) cast iron great spur wheel with 96 cogs. The spur wheel weighed 2 tons 13 cwt (2,693 kg) and cost £32. 0 .0 new in 1860.[3]

Millers

References

Related Articles

Wikiwand AI